NF61S-M2 TE Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction.....................................................1 1.1 Before You Start................................................................... 1 1.2 Package Checklist................................................................ 1 1.3 Motherboard Features.......................................................... 2 1.4 Rear Panel Connectors.......................................................... 3 1.5 Motherboard Layout ............................................
NF61S-M2 TE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Always disconne ct the compute r from powe r outle t be fore ope ration.
Motherboard Manual 1.3 MOT HERBOARD FEAT URES SPEC AMD 64 Architecture enables 32 and 64 bit Socket AM2 CPU AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 computing / Sempron processors FSB Chipset Super I/O Supports Hyper Transport and Cool=n=Quiet Supports up to 1GHz Bandwidth Support HyperTransport GeForce 6100-405 ITE 8716F Environment Control initiatives, Provides the most commonly used legacy H/W Monitor Super I/O functionality.
NF61S-M2 TE SPEC Back Panel I/O CD-in Connector x1 Supports CD audio-in function S/PDIF out connector x1 Supports digital audio out function CPU Fan header x1 CPU Fan power supply (with Smart Fan function) System Fan header x1 System Fan Power supply CMOS clear header x1 Restore CMOS data to factory default USB connector x2 Each connector supports 2 front panel USB ports Printer Port Connector x1 Each connector supports 1 Printer port Power Connector (24pin) x1 Connects to Power sup
Motherboard Manual 1.5 MOT HERBOARD LAYOUT JCFAN1 JKBMS1 J1 JCOM1 JATXPWR2 DIMMA1 A M2 DIMMB1 Socket JVGA1 J2 JUSB1 JATXPWR1 IDE1 JUSBLAN1 JAUDIO1 GeForce 6100-405 JCDIN1 JAUDIOF1 PEX1_1 SATA1 SATA2 LAN PEX16_1 BIOS JCMOS1 BAT1 PCI1 PCI2 Codec JSPDIF_OUT1 Super I/O J3 JPRNT1 JUSB2 JUSB3 FDD1 JSFAN1 st Not e: ■ represe nts the 1 pin.
NF61S-M2 TE CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation.
NF61S-M2 TE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INST ALLING SYST EM MEMORY DIMMA1 DIMMB1 A. Memory Modules 8 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
NF61S-M2 TE B. Memory Capacity DIMM Socket Location DIMMA1 256MB/512MB/1GB/2GB *1 DIMMB1 256MB/512MB/1GB/2GB *1 DDR Module Total Memory Size Max memory 4GB. C. Dual Channel Memory installation To trigger the Dual Channel f unction of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pair, shown in the following table.
Motherboard Manual 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk Conne ctor The motherboard has a 32-bit Enhanced IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
NF61S-M2 TE PEX1_1: PCI-Expre ss x1 Slot - PCI-Express 1.0a compliant. Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total. - PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth ov er the traditional PCI architecture. PEX16_1: PCI-Express x16 Slot (x8 Spee d) - PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 2GB/s simultaneously per direction, f or an aggregate of 4GB/s totally. - x8 Speed by Chipset Specif ication.
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch f unctions.
NF61S-M2 TE JATXPWR1: ATX Powe r Source Conne ctor This connector allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Motherboard Manual JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC f ront panel, and also can be connected with internal USB devices, like USB card reader. JUSB2 JUSB3 2 1 10 9 Pin Assignment 1 2 3 4 5 6 7 8 9 10 +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC SATA1/SATA2: Se rial ATA Conne ctors The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace, it satisfies the SATA 2.
NF61S-M2 TE JCDIN1: CD-RO M Audio-in Connector This connector allows user to connect the audio source f rom the v ariaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc. Pin 1 4 1 2 3 4 Assignment Left Channel Input Ground Ground Right Channel Input J2/J3: Power Source Heade rs for USB Ports Pin 1-2 Close: J2: +5V f or USB ports at JUSB1/JUSBLAN1. J3: +5V f or USB ports at front panel (JUSB2/JUSB3).
Motherboard Manual J1: Power Source Heade r for PS/2 Ke yboard and Mouse 3 3 1 1 Pin 1-2 close +5V for PS/2 keyboard and mouse. 3 1 Pin 2-3 close PS/2 keyboard and mouse are powered by +5V standby voltage. Note: In order to support this func tion “Power-on s ystem via keyboar d and mouse”, “J 1” jumper cap s houl d be pl aced on Pi n 2-3.
NF61S-M2 TE JSPDIF_O UT1: Digital Audio-out Conne ctor This connector allows user to connect the PCI bracket SPDIF output header. 1 Pin Assignment 1 2 3 +5V SPDIF_OUT Ground 3 JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC.
Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM Supports Windows XP Home/Prof essional Edition, and Windows 2000 Professional. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. 4.3 HOW RAID WORKS RAID 0: The controller “ stripes” data across multiple drives in a RAID 0 array system.
NF61S-M2 TE RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.
NF61S-M2 TE 5.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install 5.
Motherboard Manual 5.4 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning.
NF61S-M2 TE CHAPTER 6: WARPSPEEDER™ III 6.1 INT RODUCT ION [WarpSpeeder™ III], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
Motherboard Manual 6.3 INST ALLAT ION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. Click “Finish” button. Usage : The following figures are only for reference, the screen printed in this user manual will change according to your motherboard on hand.
NF61S-M2 TE 6.4 WARPSPEEDER™ III 1. Desktop Icon After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III] icon will appear on the desktop, just like the icon shown below. Now you can launch the [WarpSpeeder™ III] utility simply by double-clicking the desktop icon. 2. Main Panel If you double-click the desktop icon, [WarpSpeeder™ III] will be launched. Please refer to the following figure; the utility’s first window you will see is Main Panel. Main Panel contains fe ature s as follows: a.
Motherboard Manual 3. Overclock/Overvoltage Panel Click the Overclock/Overvoltage button in the Main Panel, the button will be highlighted and the Overclock/Overvoltage Panel will show up as the following figure. As you can see, the Overclock Panel is on the right side, and the Overvoltage Panel is on the left side.
NF61S-M2 TE O ve rclock Panel contains these fe atures: a. “Auto-Overclock”: User can click this button and [WarpSpeeder™ III] will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to proceed. Then [WarpSpeeder™ III] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function.
Motherboard Manual O ve rvoltage Panel contains these fe ature s: a. b. “CPU Voltage”: This function allows user to adjust CPU voltage. increase or “-“ to decrease the CPU voltage. Click on “+” to “Memory Voltage”: This function allows user to adjust Memory voltage. to increase or “-“ to decrease the Memory voltage. Click on “+” 4. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will show up as the following figure.
NF61S-M2 TE 5. About Panel Click the “about” button in Main Panel, the button will be highlighted and the About Panel will show up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the the version number of [WarpSpeeder™ III] utility.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Spezifikationen Sockel AM2 CPU Die AMD 64-Architektur unterstützt eine 32-Bit- AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 / und 64-Bit-Datenverarbeitung Sempron Prozessoren FSB Unterstützt Hyper Transport und Cool’n’Quiet Unterstützt HyperTransport mit einer Bandbreite von bis zu 1 GHz Chipsatz Super E/A GeForce 6100-405 ITE 8716F Umgebungskontrolle, Bietet die häufig verwendeten alten Super Hardware-Überwachung E/A-Funktionen.
NF61S-M2 TE Spezifikationen RückseitenE/A Platinengrö Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion CD-IN-Anschluss x1 Unterstützt die CD Audio-In-Funktion S/PDIF- Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x1 "CMOS löschen"-Sockel x1 USB-Anschluss x2 Druckeranschluss-Anschluss x1 Stromanschluss (24-polig) x1 Stromanschluss (4-po
Motherboard Manual FRANCE SPEC Socket AM2 UC Processeurs AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 / Sempron Bus frontal Chipset Super E/S L'architecture AMD 64 permet le calcul 32 et 64 bits Prend en charge Hyper Transport et Cool’n’Quiet Prend en charge Hyper Transport jusqu'à une bande passante de1 GHz GeForce 6100-405 ITE 8716F Initiatives de contrôle environnementales, Fournit la fonctionnalité de Super E/S Moniteur de matériel patrimoniales la plus utilisée.
NF61S-M2 TE SPEC Chaque connecteur prend en charge 1 périphérique Connecteur SATA2 x2 Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant Connecteur d'entrée CD x1 Prend en charge la fonction d'entrée audio de CD Connecteur de sortie S/PDIF x1 Embase de ventilateur UC x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Connecteur USB x2 Connecteur de Port d'im
Motherboard Manual IT ALIAN SPECIFICA Socket AM2 CPU L’architettura AMD 64 abilita l a computazione Processori AMD Athlon 64 / Athlo n 64 32 e 64 bit FX / Athlon 64 X2 / Sempron FSB Supporto di Hyper Tra nsport e Cool’ n’Quiet Supporto di Hyper Transport fi no a1 GHz di larghezza di banda Chipset GeForce 6100-405 ITE 8716F Super I/O Funzioni di co ntrollo dell’ambiente: Fornisce le funzio nalità legacy Super Monitoraggio hardware I/O usate più comunemente.
NF61S-M2 TE SPECIFICA Connettore pa nnello fro ntale x1 Supporta i servizi del pa nnell o fr ontale Connettore audio frontale x1 Supporta la funzione audi o pannello frontale Connettore CD-in x1 Supporta la funzione i nput audio C D Connettore output S/P DIF x1 Supporta la funzione d’output a udio digitale Collettore ventolina CPU x1 Collettore ventolina sistema x1 Collettore cancellazione CMOS x1 Connettore USB x2 Connettore Porta stampa nte x1 Connettore alimentazione x1 Alimentazi
Motherboard Manual SPANISH Especificación La arquitectura AMD 64 permite el procesado de 32 Conector AM2 CPU Procesadores AMD Athlon 64 / Athlon 64 FX / Soporta las tecnologías Hyper Transport y Athlon 64 X2 / Sempron FSB y 64 bits Cool’n’Quiet Admite HyperTransport con un ancho de banda de hasta1 GHz Conjunto de chips GeForce 6100-405 ITE 8716F Iniciativas de control de entorno, Le ofrece las funcionalidades heredadas de Monitor hardware uso más común Súper E/S.
NF61S-M2 TE Especificación Conector de panel frontal X1 Soporta instalaciones en el panel frontal Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal Conector de entrada de CD X1 Soporta función de entrada de sonido de CD Conector de salida S/PDIF X1 Soporta función de salida de sonido digital Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con función Smart Fan) Cabecera de ventilador de sistema X1 Fuente de alimentación de ventilador
Motherboard Manual PORT UGUESE ESPECIFICAÇÕES A arquitectura AMD 64 permite uma computação de Socket AM2 CPU Processadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 / Sempron FSB Chipset o Super I/O Suporta as tecnologias Hyper Transport e Cool’n’Quiet Suporta a tecnologia HyperTransport com uma largura de banda até1 GHz GeForce 6100-405 ITE 8716F Especificaçã 32 e 64 bits Iniciativas para controlo do ambiente Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.
NF61S-M2 TE ESPECIFICAÇÕES Conector do painel frontal x1 Para suporte de várias funções no painel frontal Conector de áudio frontal x1 Suporta a função de áudio no painel frontal Conector para entrada de CDs x1 Suporta a entrada de áudio a partir de CDs Conector de saída S/PDIF x1 Suporta a saída de áudio digital Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x1 Conector para limpeza do CMOS x1 Conector USB x2 Conector da para impressora x1 Conector de alimentação x1
Motherboard Manual POLISH SPEC Socket AM2 Procesor Architektura AMD 64 umożliwia przetwarzanie 32 i AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 64 bitowe / Sempron Procesory FSB Chipset Obsługa Hyper Transport oraz Cool’n’Quiet Obsługa HyperTransport o szerokości pasma do1 GHz GeForce 6100-405 Gniazda DDR2 DIMM x 2 Pamięć Każde gniazdo DIMM obsługuje moduły główna 256/512MB oraz 1GB/2GB DDR2 ITE 8716F Funkcje kontroli warunków pracy, Zapewnia najbardziej powszechne funkcje Monitor H/W Super I
NF61S-M2 TE SPEC Złącze wejścia CD x1 Złącze wyjścia S/PDIF x1 Złącze główkowe wentylatora procesora Obsługa funkcji cyfrowego wyjścia audio Zasilanie wentylatora procesora (z funkcją Smart x1 Złącze główkowe wentylatora systemowego Obsługa funkcji wejścia audio CD x1 Fan) Zasilanie wentylatora systemowego Złącze główkowe kasowania Back Panel I/O Wymiary płyty Funkcje specjalne CMOS x1 Złącze USB x2 Złącze Port drukarki x1 Złącze zasilania (24 pinowe) x1 Złącze zasilania (4 pinowe) x1
Motherboard Manual RUSSIAN СПЕЦ CPU Гнездо AM2 (центральный Процессоры AMD Athlon 64 / Athlon 64 FX / данных на 32 и 64 бит процессор) Athlon 64 X2 / Sempron FSB Набор микросхем Архитектура AMD 64 разрешать обработка Поддержка Hyper Transport и Cool’n’Quiet Поддержка HyperTransport с пропускной способностью до1GГц GeForce 6100-405 Модуль памяти с двухканальным режимом Слоты DDR2 DIMM x 2 Основная память DDR2 Каждый модуль DIMM поддерживает Поддержка DDR2 400 / 533 / 667 / 800 256/512МБ & 1ГБ/2
NF61S-M2 TE СПЕЦ Разъём на лицевой панели x1 Входной звуковой разъём x1 Разъём ввода для CD x1 Разъём вывода для S/PDIF x1 Поддержка звуковых функций на лицевой панели Поддержка функции ввода для CD Поддержка вывода цифровой звуковой функции Источник питания для вентилятора Контактирующее приспособление вентилятора центрального процессора x1 Контактирующее приспособление вентилятора системы Поддержка устройств на лицевой панели x1 центрального процессора (с функцией интеллектуального вентилятора
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت AM2ﻡﻘﺒﺲ إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ AMD Athlon 64 / Athlon 64 FX /ﻡﻌ ﺎﻟﺠﺎت Cool’n’Quietو Hyper Transportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Athlon 64 X2 / Sempron اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﺗﺮدد 1000ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ HyperTransportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ GeForce 6100-405 ﻓﺘﺤﺔDDR2 DIMM ﻋﺪد2 ﺳﻌﺔ DDR2ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ ﻡﻴﺠﺎ ﺏﺎﻳﺖ و /1و 2
NF61S-M2 TE اﻟﻤﻮاﺻﻔﺎت ﻡﻨﺎﻓﺬ دﺥﻞ /ﺥﺮج اﻟﻠﻮﺣﺔ ﻡﻨﻔﺬSATA ﻋﺪد 2 SATAﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬCD-IN ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ دﺥﻞ ﺹﻮت اﻟﻘﺮص اﻟﻤﺪﻡﺞ ﻡﻨﻔﺬ ﺥﺮجS/PDIF ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 Smart Fanﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 1
Motherboard Manual JAPANESE 仕様 AMD 64アーキテクチャでは、32ビットと64ビット計算が Socket AM2 CPU AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 可能です ハイパートランスポートとクールアンドクワイアットをサ / Sempron プロセッサ ポートします FSB 1 GHzのバンド幅までハイパートランスポートを サポートします チップセット GeForce 6100-405 DDR2 DIMMスロット x 2 各DIMMは 256/512MB & 1GB/2GB DDR2をサ メインメモリ ポート デュアル チャンネルモードDDR2メモリモジュール DDR2 400 / 533 / 667 / 800をサポート 登録済みDIMMとECC DIMMはサポートされません 最大メモリ容量4GB ITE 8716F Super I/O グラフィック 環境コントロールイニシアチブ、 もっとも一般に使用されるレガシーSuper I/O機 H/Wモニター 能を採用しています。 ファン速度コントローラ/
NF61S-M2 TE 仕様 SATAコネクタ x2 各コネクタは1つのSATAデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします CDインコネクタ x1 CDオーディオイン機能をサポートします S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x1 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x2 各コネクタは2つのフロントパネルUSBポートをサポート します 背面パネル I/O プリンタポートコネクタ x1 電源コネクタ(24ピン) x1 電源コネクタ(4ピン) x1 PS/2キーボード x1 PS/2マウス x1 シリアルポート x1 VGAポート x1 LANポート x1 USBポート x4 オーディオジャック x3 各コネクタは1つのプリン