User`s manual

M7NCD Ultra BIOS Setup
18
The Choices: Onboard/AGP, PCI Solt (default).
OnChip USB
T his item allows you to set the onchip USB.
The Choices: V1.1+V2.0 (default), Disabled, V1.1.
USB Device Legacy Support
This item allows you to enable or disable USB devices.
Enabled (default) Enable USB Keyboard Support.
Disabled Disable USB Keyboard Support.
Serial ATA
This item allows you to enable or disable Serial ATA function.
The Choices: Enabled (Default), Disabled.
Onboa rd I/O Chip Se tup
Onbo ard FDC Contro ller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If install and FDC or the system has no
floppy drive, select Disabled in this field.
The Choices: Enabled (default), Disabled.
Onbo ard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports.
The Choices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3.
Onbo ard Serial Port2
Select an address and corresponding interrupt for the first and second serial ports.
The Choices: Disabled, 3F8/IRQ4, 2F8/IRQ3 (default), 3E8/IRQ4, 2E8/IRQ3,
Auto.
UART Mode Select
This item allows you to determine which Infra Red (IR) function of onboard I/O
chip.
The Choices: Normal, ASKIR, IrDA (default).
RxD, TxD Active
This item allows you to determine which Infrared (IR) function of onboard I/O
chip.
The Choices: Hi / Lo (default), Hi / Hi, Lo / Hi, Lo / Lo.
IR Transmissio n Delay
T his item allows you to enable/disab le IR transmiss ion de lay.
The Choices: Enabled (default), Disabled.
This Manual: http://www.manuallib.com/file/2538860