User`s manual

M7NCD Ultra BIOS Setup
14
CAS Latency
This item allows you to set System Performance to “Optimal” to use the delay
recommended by the DIMM’s manufacturer.
The Choices: 2.5 (Default), 2.0, 3.0.
FSB Spread Spectrum
This item allows you to select the FSB Spread Spectrum.
The Choices: 0.50% (Default).
AGP Spread Spectrum
This item allows you to select the AGP Spread Spectrum.
The Choices: Disabled (Default).
Frame Buffer Size
This item allows you to select the Frame Buffer Size.
The Choices: 32M (Default), 8M, 16M, 64M, 128M, Disabled.
AGP Aperture Size (MB)
Select the size of the Accelerated Graphics Port (AGP) aperture. The apertures is a portion
of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
The Choices: 64 (default), 4, 8, 16, 32, 128, 256.
AGP Frequency
This item allows you to select the AGP Frequency.
The Choices: Auto (Default), 50MHz, 66MHz, 67MHz, 68MHz, 69MHz,
70MHz, 71MHz, 72MHz, 73MHz, 74MHz, 75MHz, 76MHz, 77MHz, 78MHz,
79MHz, 80MHz, 81MHz, 82MHz, 83MHz, 84MHz, 85MHz, 86MHz, 87MHz,
90MHz, 93MHz, 95MHz, 97MHz, 100MHz.
AGP 8X Support
This item allows you to enable or disable AGP 8X Support.
The Choices: Enabled (Default), Disabled.
AGP Fast Write Capability
T his item allows you Enabled or Disab led AGP Fast Write Capability.
The Choices: Enabled (Default), Disabled.
CPU Thermal Throttling
T his item allows you to select the CPU Thermal Throttlin g.
The Choices: 50% (Default), Disabled, 87.5%, 75%, 62.5%, 37.5%, 25%,
This Manual: http://www.manuallib.com/file/2538860