User`s manual

MM77NNCCDD UUllttrraa
10
2.3 DDR DIMM MODULES: DIMMB1-2, DIMMA1
Note:
1. For Dual-channel DDR (128-bit) high performance, at least 2 or more
DIMM modules must be installed. (It has to be the combination of DIMMA
and DIMMB.) With only one DIMM installed, the memory performs only at
64-bit.
2. DRAM Access Time: 2.5V Unbuffered DDR 266/333/400 MHz Type
required.
3. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)
Total Memory Size with Unbuffered DIMMs (for reference)
DIMM Socket
Location
DDR Module
To ta l Me m o r y
Size (MB)
DIMMB1 64MB/128MB/256MB/512MB/1GB *1
DIMMB2 64MB/128MB/256MB/512MB/1GB *1
DIMMA1 64MB/128MB/256MB/512MB/1GB *1
Max is 3GB
Installing DDR Module
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM
on the slot such that the notch on the DIMM matches the break on the
slot.
2. Insert the DIMM firmly and vertically into the slot until the retaining chip
snap back in place and the DIMM is properly seated.
This Manual: http://www.manuallib.com/file/2538860