Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction ................................................. 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................1 Package Checklist ............................................................................1 Motherboard Specifications .............................................................2 Rear Panel Connectors....................................................................4 Motherboard Layout..
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ CHAPTER 1: INTRODUCTION 1.1 Before You Start Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 Motherboard Specifications Specifications Socket 1150 for Intel® Core i7 / i5 / i3 / Pentium / Celeron processor CPU Support Maximum CPU TDP (Thermal Design Power): 95Watt * Please refer to www.biostar.com.tw for CPU support list.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Specifications Internal I/Os Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x SATA 6.0Gb/s Connector 4x SATA 6.0Gb/s Connector 2x USB 2.0 Header 2x SATA 2.0Gb/s Connector (each header supports 2 USB 2.0 ports) 2x USB 2.0 Header 1x USB 3.0 Header (each header supports 2 USB 2.0 ports) (each header supports 2 USB 3.0 ports) 1x USB 3.0 Header 1x 4-Pin Power Connector (each header supports 2 USB 3.
Motherboard Manual 1.4 Rear Panel Connectors Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Note1: Note2: Note3: 4 HDMI, DVI-D & VGA ports only work with an Intel® integrated Graphics Processor. Maximum resolution: HDMI: 4096 x 2160 @24Hz, compliant with HDMI 1.4a DVI: 1920 x 1200 @60Hz VGA: 1920 x 1200 @60Hz The mainboard supports three onboard display outputs at same time.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 1.5 Motherboard Layout st Note: ■ represents the 1 pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 Install Central Processing Unit (CPU) Step 1: Locate the CPU socket on the motherboard Note1: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Note2: The motherboard might equip with two different types of pin cap. Please refer below instruction to remove the pin cap.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Step 4: Hold processor with your thumb and index fingers, oriented as shown. Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket. Note1: The LGA1155 CPU is not compatible with LGA 1150 socket. Do not install a LGA 1155 CPU on the LGA 1150 socket. Note2: The CPU fits only in one correct orientation. Do not force the CPU into the socket to prevent damaging the CPU.
Motherboard Manual 2.2 Install a Heatsink Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest to the CPU fan connector. Step 2: Press down two fasteners at one time in a diagonal sequence to secure the CPU fan assembly in place. Ensure that all four fasteners are secured. Note1: Do not forget to connect the CPU fan connector.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 2.3 Connect Cooling Fans These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. CPU_FAN1: CPU Fan Header Pin 1 2 3 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control (By Fan) Pin 1 2 3 Assignment Ground +12V FAN RPM rate sense SYS_FAN1/2: System Fan Header Note: CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors.
Motherboard Manual 2.4 Install System Memory DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB/8GB DDR3_A2 512MB/1GB/2GB/4GB/8GB DDR3_B1 512MB/1GB/2GB/4GB/8GB DDR3_B2 512MB/1GB/2GB/4GB/8GB Total Memory Size Max is 32GB. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
Motherboard Manual PEX16_1: PCI-Express Gen3 x16 Slot - PCI-Express 3.0 compliant. Maximum theoretical realized bandwidth of 16GB/s simultaneously per direction, for an aggregate of 32GB/s totally. PEX1_1/1_2: PCI-Express Gen2 x1 Slots - PCI-Express 2.0 compliant.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 2.6 Jumper Setting The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin1-2 closed JCMOS1: Clear CMOS Jumper Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default).
Motherboard Manual 2.7 Headers & Connectors ATXPWR1: ATX Power Source Connector This connector allows user to connect an ATX 24-pin power supply. Make sure to find the proper orientation before plugging the connector. Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ PANEL1: Front Panel Header This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel This header allows user to add additional USB ports on the PC front panel, and also can be connected with a wide range of external peripherals. Pin 1 2 3 4 5 6 7 8 9 10 Assignment VBUS0 SSRX1SSRX1+ Ground SSTX1SSTX1+ Ground D1D1+ ID Pin 11 12 13 14 15 16 17 18 19 20 Assignment D2+ D2Ground SSTX2+ SSTX2Ground SSRX2+ SSRX2VBUS1 Key F_USB1/2: Header for USB 2.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ F_AUDIO1: Front Panel Audio Header This header allows user to connect the chassis-mount front panel audio I/O which supports HD and AC’97 audio standards.
Motherboard Manual COM: Serial Port Header The motherboard has a serial port header for connecting RS-232 Port. Pin 1 2 3 4 5 6 7 8 9 10 J_PRINT1: Printer Port Header This header allows user to connect a printer to the PC.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ CIR1: Consumer IR Header This header is for infrared remote control and communication.
Motherboard Manual CHAPTER 3: UEFI BIOS & SOFTWARE 3.1 z z 3.2 UEFI BIOS Setup The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual in the Setup DVD.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS. 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system. 8. While the system boots up and the full screen logo shows up, press key to enter BIOS setup.
Motherboard Manual 4. An open dialog will show up to request your agreement to start the BIOS update. Click Yes to start the online update procedure. 5. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed. 6. After the download is completed, you will be asked to program (update) the BIOS or not. Click Yes to proceed. 7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot. 8.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure. 5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open. It will take several minutes, please be patient. 6. After the BIOS Update process is finished, click on OK to reboot the system. 7.
Motherboard Manual 3.3 Software Installing Software 1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled. 2. 3. Select Software Installation, and then click on the respective software title. Follow the on-screen instructions to complete the installation. Launching Software After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ eHot-Line eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Note: Before you use this utility, please set Outlook Express as your default e-mail client application program.
Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Smart EAR Hi-Fi Audio Requirements: 1. A chassis with front audio output jacks 2. An earphone or a headphone 3. Windows 7 or Windows 8 operation system Installation Guide: 1. Make sure the front audio cable of the chassis connected to the front audio header of the motherboard properly. 2. Install the Smart Ear 3D Utility from the driver DVD. 3. Connect the earphone or headphone to the front audio jack of the chassis.
Motherboard Manual Smart Connect Technology Intel® Smart Connect Technology is designed to update programs by periodically waking your computer from sleep/standby mode for a short time. This function works with applications that automatically get their data from the Internet. System Requirement: z z z z Intel Smart Connect Technology enabled in BIOS Setup Set the “ACPI Sleep State” to S3 in BIOS Setup.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Basic and advanced settings Basic Tab Update Frequency slider: This slider bar sets the amount of time the feature waits to wake your computer and update your applications. Move the slider in the user interface to change the frequency. The slider bar can be set to wake and update your computer from every 15 to 60 minutes. The longer the time between updates the less power the feature consumes.
Motherboard Manual Rapid Start Technology Intel® Rapid Start technology enables your system to get up and running faster from even the deepest sleep, saving time and power consumption. Feel secure knowing that your system will still resume to working conditions in the event of unexpected power loss while in sleep mode. System Requirement: z z An Intel® SATA SSD (SATA Gen2 or Gen3.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 3-3 After rebooting, the system will setup Intel® Rapid Start Technology automatically. We recommend you restart the system after this installation is complete, Step 4: Configuring Intel® Rapid Start Application Launch the Intel® Rapid Start Technology Manager application from [Start] > [All Programs] > [Intel] or click the icon in the notification area.
Motherboard Manual Intel® Small Business Advantage Intel Small Business Advantage (Intel SBA) provides an out-of-the-box hardware-based security and productivity suite designed for the small business user. Software Monitor Software Monitor helps keep critical security software running by monitoring it at the hardware level and alerting the business if there has been an attack.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Installing Intel SBA This procedure describes how to install Intel SBA. 1. Logon to the computer with a user that has administrator privileges. 2. Copy the Setup.exe file to the computer. 3. Double-click Setup.exe. The Welcome to the Setup Program window opens. 4. Click Next. The installer starts the installation and the Setup Progress window opens showing the progress of the installation.
Motherboard Manual CHAPTER 4: USEFUL HELP 4.1 Driver Installation After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system. A. Driver Installation To install the driver, please click on the Driver icon.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 4.2 AMI BIOS Beep Code Boot Block Beep Codes Number of Beeps Continuing Description Memory sizing error or Memory module not found POST BIOS Beep Codes Number of Beeps 1 8 4.3 Description Success booting. Display memory error (system video adapter) Troubleshooting Probable 1. 2. There is no power in the system. Power LED does not shine; the fan of the power supply does not work Indicator light on keyboard does not shine. Solution 1. 2. 3.
Motherboard Manual CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 4.4 RAID Functions RAID Definitions RAID 0: In a RAID 0 system data are split up in blocks that get written across all the drives in the array. By using multiple disks (at least 2) at the same time, this offers superior I/O performance. This performance can be enhanced further by using multiple controllers, ideally one controller per disk. Features and Benefits Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.
Motherboard Manual RAID 10: RAID 10 combines the advantages (and disadvantages) of RAID 0 and RAID 1 in one single system. It provides security by mirroring all data on a secondary set of disks (disk 3 and 4 in the drawing below) while using striping across each set of disks to speed up data transfers. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ This Page Intentionally Left Blank 39
Motherboard Manual APPENDIX: Specifications in Other Languages Arabic اﻟﻤﻮاﺻﻔﺎت ﻗﺎﻋﺪة وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ اﻟﻤﺄﺧﺬ 1150ﻟﻤﻌﺎﻟﺞ اﻳﻪ إم دى Intel® Core i7 / i5 / i3 / Pentium / Celeron اﻟﺤﺪ اﻷﻗﺼﻰ ﻟﻠﻄﺎﻗﺔ اﻟﺤﺮارﻳﺔ ﻓﻲ ﺗﺼﻤﻴﻢ اﻟﻤﻌﺎﻟﺞ ) 95 :( thermal design power – TDPواط. * ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ www.biostar.com.twﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﻤﻌﺎﻟﺞ .
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ اﻟﻤﻮاﺻﻔﺎت اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺪاﺧﻠﻴﺔ +Hi-Fi Z87S3+ & Hi-Fi H87S3+ +Hi-Fi B85S3+ وﺻﻠﺔ 6 SATA x 6ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ وﺻﻠﺔ 6 SATA x 4ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﻣﻮزع x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 2.0 USBآﻞ ﻣﻮزع وﺻﻠﺔ 3 SATA x 2ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 2.0 USB ﻣﻮزع x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 2.0 USBآﻞ ﻣﻮزع x 1ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 3.0 USBآﻞ ﻣﻮزع ﻣﻮزع ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 2.
Motherboard Manual French Spécifications Socket 1150 Processeurs Intel® Core i7 / i5 / i3 / Pentium / Celeron Support Unité Enveloppe thermique Unité Centrale maximum : 95Watt Centrale * Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles d'Unité Centrale.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Spécifications Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x Connecteur SATA 6.0Gb/s 4x Connecteur SATA 6.0Gb/s 2x embases USB 2.0 2x Connecteur SATA 3.0Gb/s (chaque embase supporte 2 Ports USB 2.0) 2x embases USB 2.0 1x embase USB 3.0 (chaque embase supporte 2 Ports USB 2.0) (chaque embase supporte 2 Ports USB 3.0) 1x embase USB 3.0 I/O en interne 1x 4-Broche de carte (chaque embase supporte 2 Ports USB 3.
Motherboard Manual German Spezifikationen Anschluss-1150 für Intel® Core i7 / i5 / i3 / Pentium / Celeron Prozessor CPU-Unterstützung Maximale CPU TDP (Thermal Design Power): 95 Watt * Bitte konsultieren Sie www.biostar.com.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Spezifikationen Interne I/Os Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x SATA 6.0Gb/s-Verbinung 4x SATA 6.0Gb/s-Verbinung 2x USB 2.0-Header 2x SATA 3.0Gb/s-Verbinung (jeder Header unterstützt 2 USB 2.0-Ports) 2x USB 2.0-Header 1x USB 3.0-Header (jeder Header unterstützt 2 USB 2.0-Ports) (jeder Header unterstützt 2 USB 3.0-Ports) 1x USB 3.0-Header 1x 4-Pin-Stromverbindung (jeder Header unterstützt 2 USB 3.
Motherboard Manual Italian Specificazioni Supporto processore Tipo scheda Slot 1150 per processore Intel® Core i7 / i5 / i3 / Pentium / Celeron Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 95Watt * Si prega di consultare www.biostar.com.tw per la lista di supporto del processore.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Specificazioni Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Connettore 6x SATA 6.0Gb/s Connettore 4x SATA 6.0Gb/s Distributore 2x USB 2.0 Connettore 2x SATA 3.0Gb/s (ogni distributore supporta 2 slot USB 2.0) Distributore 2x USB 2.0 Distributore 1x USB 3.0 (ogni distributore supporta 2 slot USB 2.0) (ogni distributore supporta 2 slot USB 3.0) Distributore 1x USB 3.0 Connettore con 4 pin x1 (ogni distributore supporta 2 slot USB 3.
Motherboard Manual Japanese 仕様 Intel® Core i7 / i5 / i3 / Pentium / Celeron プロセッサの Socket 1150 CPU サポート 最大 CPU TDP (Thermal Design Power 最大放熱量):95 W *CPU サポート リストについては、www.biostar.com.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ 仕様 Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ 6x SATA 6.0Gb/s コネクタ 4x SATA 6.0Gb/s コネクタ 2x USB 2.0 ヘッダー 2x SATA 3.0Gb/s コネクタ (各ヘッダーは、2つの USB 2.0 ポートを 2x USB 2.0 ヘッダー サポートしています) (各ヘッダーは、2つの USB 2.0 ポートをサポ 1x USB 3.0 ヘッダー ートしています) (各ヘッダーは、2つの USB 3.0 ポートを 1x USB 3.0 ヘッダー 内蔵 I/O サポートしています) (各ヘッダーは、2つの USB 3.
Motherboard Manual Polish Specyfikacje techniczne Gniazdo procesora (Socket) 1150 dla procesorów Intel® Core i7 / i5 / i3 / Pentium / Celeron Obsługa procesora Moc Wydzielanego Ciepła (TDP - Thermal Design Power): 95Watt * Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej www.biostar.com.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Specyfikacje techniczne Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Złącza 6x SATA 6.0Gb/s Złącza 4x SATA 6.0Gb/s Złącza 2x USB 2.0 Złącza 2x SATA 3.0Gb/s (każde złącze obsługuje dodatkowe 2 Złącza 2x USB 2.0 porty USB 2.0) (każde złącze obsługuje dodatkowe 2 porty Złącze 1x USB 3.0 USB 2.0) (każde złącze obsługuje dodatkowe 2 Złącze 1x USB 3.0 porty USB 3.0) (każde złącze obsługuje dodatkowe 2 porty Złącza 4 pionowe x 1 USB 3.
Motherboard Manual Portuguese Especificações Porta 1150 para processador Intel® Core i7 / i5 / i3 / Pentium / Celeron Suporte Processador Alimentação de Design Térmico (TDP – Thermal Design Power): 95Watt * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do processador.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Especificações Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Conector 6x SATA 6.0Gb/s Conector 4x SATA 6.0Gb/s Dispositivo 2x USB 2.0 (cada Dispositivo Conector 2x SATA 3.0Gb/s suporta 2 portas USB 2.0) Dispositivo 2x USB 2.0 (cada Dispositivo Dispositivo 1x USB 3.0 (cada Dispositivo suporta 2 portas USB 2.0) suporta 2 portas USB 3.0) Dispositivo 1x USB 3.0 (cada Dispositivo Conector de 4 pinos x1 suporta 2 portas USB 3.
Motherboard Manual Russian Спецификации Поддержка Сокет 1150 для процессоров Intel® Core i7 / i5 / i3 / Pentium / Celeron центрального Максимальный термопакет центрального процессора (TDP): 95 ватт процессора * Перечень поддержки центрального процессора смотрите на www.biostar.com.tw.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Спецификации Внутр. Плата ввода-вывода Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Соединитель 6x SATA 6 Гб/с Соединитель 4x SATA 6 Гб/с 2 контакта USB 2.0 (каждый контакт Соединитель 2x SATA 3 Гб/с поддерживает 2 порта USB 2.0) 2 контакта USB 2.0 (каждый контакт 1 контакт USB 3.0 (каждый контакт поддерживает 2 порта USB 2.0) поддерживает 2 порта USB 3.0) 1 контакт USB 3.0 (каждый контакт 1 4-выводный разъем питания поддерживает 2 порта USB 3.
Motherboard Manual Spanish Especificaciones Ranura 1150 para procesador Intel® Core i7 / i5 / i3 / Pentium / Celeron Compatibilidad con Alimentación de Proyección Térmica (TDP – Thermal Design Power): 95Watt el procesador *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el procesador.
Hi-Fi Z87S3+/Hi-Fi H87 S3+/Hi-Fi B85 S3+ Especificaciones Hi-Fi Z87S3+ & Hi-Fi H87S3+ Hi-Fi B85S3+ Conector 6x SATA 6Gb’s Conector 4x SATA 6Gb’s Distribuidor 2x USB 2.0 (cada distribuidor Conector 2x SATA 3Gb’s soporta 2 ranuras USB 2.0) Distribuidor 2x USB 2.0 (cada distribuidor Distribuidor 1x USB 3.0 (cada distribuidor soporta 2 ranuras USB 2.0) soporta 2 ranuras USB 3.0) Distribuidor 1x USB 3.0 (cada distribuidor Conector con 4 patillas x1 soporta 2 ranuras USB 3.