Troubleshooting guide

P:\WINWORD\P:\WINWORD\Torch Service Guide 46 and 52inch screens\
Service Guide for EN069K series 46 & 52 inch LCD screen.doc Page 8
Screen Controls and Button panel
To gain access to the screen buttons, remove the 3 x M3x6 countersunk black screws.
Buttons below are shown after panel removed. (earlier versions have no panel)
PC power Screen indicator Power Left Right Up Down Menu Source
Blue Red
Power button: Press to turn screen on/off.
Power indicator (red): - Off when no power is applied to the screen
- On (steady) when power is applied and screen is
in stand-by mode
- Blinks and the turns off when screen becomes active
PC power indicator (blue): On while PC is running
Left: Move left in the on-screen menu.
Right: Move right in the on-screen menu.
Up: Increase volume or use in the on-screen menu.
Down: Decrease volume or use in the on-screen menu.
Menu: Press to see an on-screen display (OSD) of your screen’s features.
Source: Toggles between all input sources. (Set to PC input)
For further information on the use of these controls, see the LCD TV user manual.
Press once to
switch
computer on,
press once more
to turn off