Troubleshooting guide

P:\WINWORD\P:\WINWORD\Torch Service Guide 46 and 52inch screens\
Service Guide for EN069K series 46 & 52 inch LCD screen.doc Page 6
Cable Access panels
The picture above is of the rear of the screen with the access panels closed. To fit the
cable, undo the knurled silver thumbscrew and remove the side access hatch. It is not
really necessary to remove the rear access hatch, but you may if you wish.
The cable can be led out from the screen in a number of different ways according the
needs of the installation.
Side access panel
with knurled
thumbscrew
Rear access panel
with 4 countersunk
screws M4 x 6 mm