Troubleshooting guide

P:\WINWORD\P:\WINWORD\Torch Service Guide 46 and 52inch screens\
Service Guide for EN069K series 46 & 52 inch LCD screen.doc Page 4
Voltage Selection
Torch Computers 46” and 52” LCD screens, model Series EN063/69K, are designed to
work on both 110-120 VAC (60Hz) and 220-240 VAC (50Hz) 435 watts mains electricity
supplies.
Normally, the screen will be delivered to the end user with the correct voltage for the
local supply already set.
Type UK – (5amp fuse fitted) used in United Kingdom, Singapore, Hong Kong, and
some other countries.
The other end of the cable is an IEC socket, type C13.
This cable is for use on 220-240 VAC, 50 Hz
Type Schuko – used in many European countries
The other end of the cable is an IEC socket, type C13.
This cable is for use on 220-240 VAC, 50 Hz
Type USA – used in USA, Canada, Taiwan and some other countries
The other end of the cable is an IEC socket, type C19.
This cable is for use on 110-120 VAC, 60 Hz
For countries with 220-240 VAC supplies, but which use neither the UK plug nor the
European (Schuko) plug, the user should obtain a professionally-made power cable with
the local plug at one end and the IEC type C13 socket at the other, which can then be
used in place of the 220-240 cables supplied.
Countries with 110-120 VAC supplies often use the USA type plug, in which case the
type USA cable supplied can be used. (See above)
IEC type C13 socket