Troubleshooting guide

P:\WINWORD\P:\WINWORD\Torch Service Guide 46 and 52inch screens\
Service Guide for EN069K series 46 & 52 inch LCD screen.doc Page 22
When the bracket is securely fixed to the wall, the screen can be hung upon it, using at
least two people to lift it. Locate the guide fin into the guide slots and slide the screen
upwards until the screws drop into the square holes. Lower the screen slightly and
ensure that the screws have located correctly in the holes within the screen.
If the screen is not exactly level, the adjustment nuts can be used for fine adjustment.
The screen must be removed again, and then the top nut on the screws can be wound
up or down, or removed entirely. The nut that holds the screws into the bracket must
not be removed or loosened; only the second nuts on each screw that is provided for
the purpose of adjustment.
Guide fin
Adjustment nuts