Troubleshooting guide

P:\WINWORD\P:\WINWORD\Torch Service Guide 46 and 52inch screens\
Service Guide for EN069K series 46 & 52 inch LCD screen.doc Page 14
1. Inline 6 pin power connector. Press the locking clip to disconnect it from the LCD
screen.
2. Remove the M3x6 screw to access the UPS. Warning do not short out the battery,
damage to the battery or electronics can occur.
3. Fuse holder with 4A 220vac fuse 20 x 5mm, (See previous page)
4. Serial communications connector.
Battery part number; NP2.5-12 (12volt 2.5Ah)
To replace the battery; disconnect the red push-on terminal first and black second, fit
the new battery connecting black push-on terminal first and red second, put the battery
back into the UPS and refit cover and screw.