GF7025-M2 TE/GF7050-M2 SE Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction.....................................................3 1.1 Before You Start................................................................... 3 1.2 Package Checklist................................................................ 3 1.3 Motherboard Features.......................................................... 4 1.4 Rear Panel Connectors.......................................................... 5 1.5 Motherboard Layout ............................................
GF7025-M2 TE/GF7050-M2 SE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Avoid touching the compone nts on mothe rboard or the rear side of the board unless ne cessary. Hold the board on the edge , do not try to be nd or flex the board.
Motherboard Manual 1.
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE On Board Connector Back Panel I/O GF7050-M2 SE Floppy connector x1 Floppy connector Printer Port connector x1 Printer Port connector x1 IDE Connector x1 IDE Connector x1 SATA Connector x4 SATA Connector x4 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 CD-in Connector x1 CD-in Connector x1 S/PDIF out connector x1 S/PDIF out connector x1 CPU Fan header x1 CPU Fan header x1 System
Motherboard Manual 1.5 MOT HERBOARD LAYOUT JKB MS1 JCFA N1 JATXP WR4 JKB MSPWR1 DIMMA1 Socket A M2 DVI-D DIMMB1 VGA JUSBPWR1 JUSB1 IDE1 JATX PWR1 JUSBPW R2 JUSBLAN1 JAUDIO1 GeForce 7025/7050 NF630a JCDIN1 JUSB3 JA UDIOF1 JUSB2 JUSB4 L AN PCI-EX16 BIOS J CMOS1 BAT1 PCI2 Codec JSPDIF_OUT1 Super I/O PCI1 JCOM1 JPRNT1 FDD1 Not e: ■ represe nts the 1st pin.
GF7025-M2 TE/GF7050-M2 SE CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation.
GF7025-M2 TE/GF7050-M2 SE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INST ALLING SYST EM MEMORY DIM MA1 DIM MB1 A. Memory Modules 10 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
GF7025-M2 TE/GF7050-M2 SE B. Memory Capacity Total Memory Size DIMM Socket Location DIMMA1 256MB/512MB/1GB/2GB DIMMB1 256MB/512MB/1GB/2GB DDR2 Module Max is 4GB. C. Dual Channel Memory installation To trigger the Dual Channel f unction of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pair, shown in the f ollowing table.
Motherboard Manual 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk Conne ctor The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
GF7025-M2 TE/GF7050-M2 SE PCI-EX16: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally. - PCI-Express supports a raw bit-rate of 2.5GB/s on the data pins. 2X bandwidth ov er the traditional PCI architecture. PCI-EX16 PCI1~PCI2: Pe riphe ral Component Interconne ct Slots This motherboard is equipped with 2 standard PCI slots.
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch f unctions.
GF7025-M2 TE/GF7050-M2 SE JATXPWR1: ATX Powe r Source Conne ctor This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 1 24 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Motherboard Manual JUSB2/JUSB3/JUSB4: He ade rs for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC f ront panel, and also can be connected with internal USB devices, like USB card reader. JUSB3 JUSB2 JUSB4 Pin Assignment 1 2 +5V (fused) +5V (fused) 3 4 USBUSB- 2 10 5 6 USB+ USB+ 1 9 7 8 Ground Ground 9 10 Key NC SATA1~SATA4: Se rial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interf ace.
GF7025-M2 TE/GF7050-M2 SE JAUDIO F1: Front Panel Audio Heade r This header allows user to connect the front audio output cable with the PC f ront panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.
Motherboard Manual JSPDIF_O UT1: Digital Audio-out Conne ctor This connector allows user to connect the PCI bracket SPDIF output header. 1 Pin Assignment 1 2 3 +5V SPDIF_OUT Ground 3 JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 1 3 3 Pin 2-3 Close: Clear CMOS data.
GF7025-M2 TE/GF7050-M2 SE JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC. 2 1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 25 Assignment Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key JCO M1: Se rial port Conne ctor The motherboard has a Serial Port Connector for connecting RS-232 Port.
Motherboard Manual JUSBPWR1/JUSBPWR2: Powe r Source Heade rs for USB Ports Pin 1-2 Close: JUSBPWR1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBPWR2: +5V for USB ports at f ront panel (JUSB2/JUSB3/JUSB4). Pin 2-3 Close: JUSBPWR1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby v oltage. JUSBPWR2: USB ports at front panel (JUSB2/JUSB3/JUSB4) are powered by +5V standby voltage.
GF7025-M2 TE/GF7050-M2 SE CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM z Supports Windows XP Home/Prof essional Edition, and Windows VISTA. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 0+1: RAID 0+1 combines the techniques used in RAID 0 and RAID 1.
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
GF7025-M2 TE/GF7050-M2 SE RAID 0+1: RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1 solution for improved performance plus resiliency. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and perf ormance, allowing for automatic redundancy. May be simultaneously used with other RAID lev els in an array, and allows for spare disks.
Motherboard Manual RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service.
GF7025-M2 TE/GF7050-M2 SE CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.
Motherboard Manual 5.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install 5.
GF7025-M2 TE/GF7050-M2 SE 5.4 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN GF7025-M2 TE Sockel AM2 GF7050-M2 SE Sockel AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / CPU FSB Chipsatz Super E/A Sempron Prozessoren Sempron Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung und 64-Bit-Datenverarbeitung Unterstützt Hyper Transport und Cool’n’Quiet Unterstützt Hyper Transport und Co
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE GF7050-M2 SE ALC662 ALC662 Audio-Codec 5.1-Kanal-Audioausgabe 5.1-Kanal-Audioausgabe Unterstützt High-Definition Audio Steckplätze Onboard-Ans chluss Rückseiten-E /A Platinengröße .
Motherboard Manual FRANCE GF7025-M2 TE UC GF7050-M2 SE Socket AM2 Socket AM2 Processeurs AMD Athlon 64 / Athlon 64 FX / Processeurs AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2 / Sempron L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64 bits bits Prend en charge Hyper Transport et Cool’n’Quiet Prend en charge Hyper Transport et Cool’n’Quiet Bus frontal Chipset Super E/S Prend en charge Hyper Transport jusqu'à une Prend en cha
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE GF7050-M2 SE ALC662 ALC662 Codec audio Sortie audio à 5.1 voies Fentes Connecteur embarqué Sortie audio à 5.
Motherboard Manual IT ALIAN GF7025-M2 TE Socket AM2 GF7050-M2 SE Socket AM2 Processori AMD Athlon 64 / Athlon 64 FX / Processori AMD Athlon 64 / Athlon 64 FX / CPU Athlon 64 x 2 / Sempro n Athlon 64 x 2 / Sempro n L’architettura AMD 64 abilita l a L’architettura AMD 64 abilita l a computazione 32 e 64 bit computazione 32 e 64 bit Supporto di Hyper Tra nsport e Cool’ n’Quiet Supporto di Hyper Tra nsport e Cool’ n’Quiet FSB Chipset Supporto di Hyper Transport fi no a1 GHz di Supporto di Hyper Trans
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE Codec audio Alloggi Connettori su scheda GF7050-M2 SE ALC662 ALC662 Uscita audio 5.1 ca nali Uscita audio 5.
Motherboard Manual SPANISH GF7025-M2 TE CPU FSB Conjunto de chips GF7050-M2 SE Conector AM2 Conector AM2 Procesadores AMD Athlon 64 / Athlon 64 FX / Procesadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2 / Sempron La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de 32 y 64 bits 32 y 64 bits Soporta las tecnologías Hyper Transport y Soporta las tecnologías Hyper Transport y Cool’n’Quiet Cool’n’Quiet Admite HyperTransport con
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE Códecs de sonido Ranuras Conectores en placa GF7050-M2 SE ALC662 ALC662 Salida de sonido de 5.1 canales Salida de sonido de 5.
Motherboard Manual PORT UGUESE GF7025-M2 TE CPU FSB Chipset GF7050-M2 SE Socket AM2 Socket AM2 Processadores AMD Athlon 64 / Athlon 64 FX / Processadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2 / Sempron A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação de 32 e 64 bits de 32 e 64 bits Suporta as tecnologias Hyper Transport e Suporta as tecnologias Hyper Transport e Cool’n’Quiet Cool’n’Quiet Suporta a tecnologia HyperTranspor
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE Codec de som Ranhuras Conectores na placa GF7050-M2 SE ALC662 ALC662 Saída de áudio de 5.1 canais Saída de áudio de 5.
Motherboard Manual POLISH GF7025-M2 TE Procesor FSB GF7050-M2 SE Socket AM2 Socket AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Procesory Sempron Procesory Architektura AMD 64 umożliwia przetwarzanie Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe 32 i 64 bitowe Obsługa Hyper Transport oraz Cool’n’Quiet Obsługa Hyper Transport oraz Cool’n’Quiet Obsługa HyperTransport o szerokości pasma do1 Obsługa HyperTransport o szeroko
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE Kodek dźwiękowy Gniazda Złącza GF7050-M2 SE ALC662 ALC662 5.1 kanałowe wyjście audio 5.
Motherboard Manual RUSSIAN GF7025-M2 TE CPU (центральный процессор) FSB Набор микросхем GF7050-M2 SE Гнездо AM2 Гнездо AM2 Процессоры AMD Athlon 64 / Athlon 64 FX / Процессоры AMD Athlon 64 / Athlon 64 FX / Athlon 64 X2 / Sempron Athlon 64 X2 / Sempron Архитектура AMD 64 разрешать обработка Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит данных на 32 и 64 бит Поддержка Hyper Transport и Cool’n’Quiet Поддержка Hyper Transport и Cool’n’Quiet Поддержка HyperTransport с пропускной
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE Локальная сеть Звуковой кодек Слоты Встроенный разъём GF7050-M2 SE Realtek RTL 8201CL Realtek RTL 8201CL Автоматическое согласование 10 / 100 Мб/с Автоматическое согласование 10 / 100 Мб/с Частичная / полная дуплексная способность Частичная / полная дуплексная способность ALC662 ALC662 5.1канальный звуковой выход 5.
Motherboard Manual ARABIC GF7050-M2 SE GF7025-M2 TE AM2ﻡﻘﺒﺲ AM2ﻡﻘﺒﺲ AMD Athlon 64 / Athlon 64 FX /ﻡﻌ ﺎﻟﺠﺎت AMD Athlon 64 / Athlon 64 FX /ﻡﻌ ﺎﻟﺠﺎت Athlon 64 x2 / Sempron Athlon 64 x2 / Sempron إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏ ﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﺗﺮدد 1000ﺏﺘﺮد
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE آﻮدﻳﻚ اﻟﺼﻮت اﻟﻔﺘﺤﺎت اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ اﻟﻠﻮﺣﺔ ﻡﻨﺎﻓﺬ دﺥﻞ /ﺥﺮج اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ GF7050-M2 SE ALC662 ALC662 ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت5.1 ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت5.
Motherboard Manual JAPANESE GF7025-M2 TE CPU GF7050-M2 SE Socket AM2 Socket AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ Sempron プロセッサ Sempron プロセッサ AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計 算が可能です 算が可能です ハイパートランスポートとクールアンドクワイアット ハイパートランスポートとクールアンドクワイアット FSB をサポートします をサポートします 1GHzのバンド幅までハイパートランスポートをサポ 1GHzのバンド幅までハイパートランスポートをサポ ートします ートします チップセット GeForce 7025/NF 630a GeForce 7050/NF 630a DDR2 DIMMスロット x 2 DDR2 DIMMスロット x
GF7025-M2 TE/GF7050-M2 SE GF7025-M2 TE サウンド Codec スロット オンボードコ ネクタ 背面パネル I/O GF7050-M2 SE ALC662 ALC662 5.1チャンネルオーディオアウト 5.