G41D3+/G41D3G+ Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ............................................................ 1 1.1 Before You Start ................................................................................ 1 1.2 Package Checklist ............................................................................. 1 1.3 Motherboard Features...................................................................... 2 1.4 1.5 Rear Panel Connectors .....................................................................
G41D3+/G41D3G+ CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC LGA 775 Supports Hyper-Threading / Execute Disable Bit / Intel Core2Duo / Core2Quad / CPU Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx processor Chipset Support 533 (For G41D3+ V6.1/6.2) / 800 / 1066 / 1333 MHz Intel G41 Intel ICH7 ITE 8721 Super I/O Environment Control initiatives, Provides the most commonly used legacy Hardware Monitor Controller Super I/O functionality.
G41D3+/G41D3G+ SPEC Serial Port Connector x1 Connects to RS-232 Port IDE Connector x1 Each connector supports 2 IDE device SATA Connector x4 Each connector supports 1 SATA device Front Panel Connector x1 Supports front panel facilities Front Audio Connector x1 Supports front panel audio function CPU Fan Header x1 CPU Fan power supply (with Smart Fan function) System Fan Header x1 System Fan Power supply Clear CMOS Header x1 Restore CMOS data to factory default USB Connector x2 Each
Motherboard Manual 1.5 MOTHERBOARD LAYOUT (G41D3+/G41D3G+ V6.0/6.1) KBMS1 LGA775 ATXPWR1 ATXPWR2 CPU _FAN1 Intel G41 JUSBV1 IDE1 USB1 DDR3_B1 VGA1 DDR3_A1 CPU1 RJ45USB1 BIOS AU DIO1 BAT TERY F_AUDIO1 PEX16_1 LAN PCI1 SATA4 Super I/O F_USB1 PCI2 J_COM1 J_PRIN T1 SYS_FAN1 Codec F_USB2 JUSBV2 SATA3 FDD1 PAN EL1 Note: ■ represents the 1st pin.
G41D3+/G41D3G+ 1.6 MOTHERBOARD LAYOUT (G41D3+/G41D3G+ V6.2) KBMS1 LGA775 ATXPWR1 CPU1 C PU_FAN1 Intel G41 JUSBV1 IDE1 USB1 DDR3_B1 VGA1 DDR3_A1 ATXPWR2 RJ 45USB1 BIOS AU DIO1 F_AUDIO1 PEX16_1 LAN PCI1 SATA4 Super I/O F_USB1 PCI2 J_COM1 Codec BAT1 JCMOS1 F_USB2 SYS_FAN1 J_PRINT1 Inte l ICH7 JUSBV2 PANEL1 SATA3 SATA1 SATA2 Note: ■ represents the 1st pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin-Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
G41D3+/G41D3G+ Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the CPU_FAN1. This completes the installation.
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different due to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
G41D3+/G41D3G+ 2.3 INSTALLING SYSTEM MEMORY DDR3_B1 DDR3_A1 A. DDR3 module 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
Motherboard Manual B. Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 256MB/512MB/1GB/2GB/4GB DDR3_B1 256MB/512MB/1GB/2GB/4GB Total Memory Size Max is 8GB. C. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. Dual Channel Status DDR3_A1 DDR3_B1 Disabled O X Disabled X O Enabled O O (O means memory installed; X, not installed.
G41D3+/G41D3G+ 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector (Only for G41D3+ V6.0/6.1) The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100 functionality.
Motherboard Manual PEX16_1: PCI-Express x16 Slot - PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth over the traditional PCI architecture. PEX16_1 PCI1/PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots.
G41D3+/G41D3G+ CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V ATXPWR2: ATX Power Source Connector This connector provides +12V to CPU power circuit.
G41D3+/G41D3G+ F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel This motherboard provides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.
Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (Default). 1 3 1 Pin 2-3 Close: Clear CMOS data. 3 ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC. 6.
G41D3+/G41D3G+ JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USB1/RJ45USB1. JUSBV2: +5V for USB ports at F_USB1/F_USB2. Pin 2-3 Close: JUSBV1: +5V STB for USB ports at USB1/RJ45USB1. JUSBV2: +5V STB for USB ports at F_USB1/F_USB2. 1 3 Pin 1-2 close JUSB V1 1 3 1 3 Pin 2-3 close JUS BV 2 J_COM1: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
Motherboard Manual J_PRINT1: Printer Port Connector This header allows you to connector printer on the PC.
G41D3+/G41D3G+ CHAPTER 4: USEFUL HELP 4.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
Motherboard Manual 4.2 SOFTWARE Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching Software After the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop.
G41D3+/G41D3G+ After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .
Motherboard Manual BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.
G41D3+/G41D3G+ Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
Motherboard Manual 4.3 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
G41D3+/G41D3G+ BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
Motherboard Manual 4.4 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
G41D3+/G41D3G+ 4.5 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen LGA 775 Intel Core2Duo / Core2Quad / CPU Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Prozessoren (Maximales Watt: 95W) FSB Chipsatz Technology Intel G41 Intel ICH7 Umgebungskontrolle, Bietet die häufig verwendeten alten Super Hardware-Überwachung E/A-Funktionen.
G41D3+/G41D3G+ Spezifikationen Steckplätze PCI-Steckplatz x2 PCI Express x16 Steckplatz x1 Diskettenlaufwerkanschluss (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual FRENCH SPEC LGA 775 Processeurs Intel Core2Duo / Core2Quad UC / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx (Watt maximum : 95W) Bus frontal Chipset Super E/S Prend en charge les technologies Hyper-Threading / d'exécution de bit de désactivation / Intel SpeedStep® optimisée/ d'architecture Intel 64 / de mémoire étendue 64 / de virtualisation 533 (Pour G41D3+ V6.1/6.
G41D3+/G41D3G+ SPEC Fentes Fente PCI x2 Fente PCI Express x16 x1 Connecteur de disquette Chaque connector prend en charge 2 lecteurs de (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual ITALIAN SPECIFICA LGA 775 Processore Intel Core2Duo / CPU Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Supporto di Hyper-Threading / Execute Disable Bit / Enhanced Intel SpeedStep® / Architettura Intel 64 / Tecnologia Extended Memory 64 / Tecnologia V irtualization (Watt massimo: 95W) FSB 533 (Per G41D3+ V6.1/6.
G41D3+/G41D3G+ SPECIFICA Alloggi Alloggio PCI x2 Alloggio PCI Express x16 x1 Connettore floppy (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual SPANISH Especificación LGA 775 Procesador Intel Core2Duo / Core2Quad / CPU Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Admite Hyper-Threading / Bit de deshabilitación de ejecución / Intel SpeedStep® Mejorado / Intel Architecture-64 / Tecnología Extended Memory 64 / Tecnología de virtualización (Vatio máximo: 95W) FSB 533 (Para G41D3+ V6.1/6.
G41D3+/G41D3G+ Especificación Ranuras Ranura PCI X2 Ranura PCI Express x16 X1 Conector disco flexible Conectores en placa Cada conector soporta 2 unidades de disco flexible (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES LGA 775 Processador Intel Core2Duo / Core2Quad Suporta as tecnologias Hyper-Threading / Execute CPU / Pentium Dual-Core / Celeron Dual-Core / Disable Bit / Enhanced Intel SpeedStep® / Intel Celeron 4xx Arquitecture -64 / Extended Memory 64 / Virtualization (Watt máximo: 95W) FSB Chipset 533 (Para G41D3+ V6.1/6.
G41D3+/G41D3G+ ESPECIFICAÇÕES Ranhuras Ranhura PCI x2 Ranhura PCI Express x16 x1 Conector da unidade de disquetes (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual POLISH SPEC LGA 775 Procesor Intel Core2Duo / Core2Quad / Procesor Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Obsługa Hyper-Threading / Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technology (Maksymalny Watt: 95W) FSB 533 (Na G41D3+ V6.
G41D3+/G41D3G+ SPEC Gniazda Gniazdo PCI x2 Gniazdo PCI Express x16 x1 Złącze napędu dyskietek Złącza wbudowane Każde złącze obsługuje 2 napędy dyskietek (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual RUSSIAN СПЕЦ CPU (центральн ый процессор) FSB Набор LGA 775 Процессор Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx (Максимальный ватт: 95W) Поддержка технологий Hyper-Threading / Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / технологии виртуализация 533 (Для G41D3+ V6.1/6.
G41D3+/G41D3G+ СПЕЦ Слоты Слот PCI x2 Слот PCI Express x16 x1 Разъём НГМД (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت LGA 775 وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ Intel Core2Duo / Core2Quad /ﻣﻌﺎﻟﺠﺎت Pentium Dual-Core / Celeron Dual-Core / ﺑﺘﺮدد یﺼﻞ إﻟﻰ Celeron 4xx Hyper-Threading / Execute Disable Bit /ﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technology )و: 95ﻗﺼ ﻮى واط( V6.1/6.
G41D3+/G41D3G+ اﻟﻤﻮاﺻﻔﺎت ﻓﺘﺤﺔ PCI اﻟﻔﺘﺤﺎت ﻋﺪد 2 ﻓﺘﺤﺔ PCI Express x16ﻋﺪد 1 ﻣﻨﻔﺬ ﻣﺤﺮك أﻗﺮاص ﻣﺮﻥﺔ ) (G41D3+/G41D3G+ V6.0/6.
Motherboard Manual JAPANESE 仕様 LGA 775 Intel Core2Duo / Core2Quad / CPU Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx processor (最高のワット: 95W) FSB Hyper-Threading / Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technologyをサ ポートします 533 (G41D3 + V6.1/6.
G41D3+/G41D3G+ 仕様 スロット PCIスロット x2 PCI Express x16スロット x1 フロッピーコネクタ x1 プリンタポートコネクタ x1 シリアルポート x1 IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします SATAコネクタ x4 各コネクタは1つのSATAデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x1 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x2 オンボードコ ネクタ 各コネクタは2つのフロッピードライブをサポートします (G41D3+/G41D3G+ V6.0/6.