Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction ................................................. 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................1 Package Checklist ............................................................................1 Motherboard Specifications .............................................................2 Rear Panel Connectors....................................................................4 Motherboard Layout...
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D CHAPTER 1: INTRODUCTION 1.1 Before You Start Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 Motherboard Specifications Specifications Socket 1150 for Intel® Core i7 / i5 / i3 / Pentium / Celeron processor CPU Support Maximum CPU TDP (Thermal Design Power): 95Watt * Please refer to www.biostar.com.tw for CPU support list.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Specifications Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D 6x SATA 6.0Gb/s Connector 4x SATA 6.0Gb/s Connector 2x USB 2.0 Header (each header supports 2 2x SATA 3.0Gb/s Connector USB 2.0 ports) 2x USB 2.0 Header (each header 1x USB 3.0 Header (each header supports 2 supports 2 USB 2.0 ports) Internal I/Os USB 3.0 ports) 1x USB 3.0 Header (each header 1x 8-Pin Power Connector supports 2 USB 3.
Motherboard Manual 1.4 Rear Panel Connectors Note1: Note2: HDMI, DVI-D & VGA ports only work with an Intel® integrated Graphics Processor. Maximum resolution: HDMI: 4096 x 2160 @24Hz, compliant with HDMI 1.4a DVI: 1920 x 1200 @60Hz VGA: 1920 x 1200 @60Hz The mainboard supports three onboard display outputs at same time.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 1.5 Motherboard Layout st Note: ■ represents the 1 pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 Install Central Processing Unit (CPU) Step 1: Locate the CPU socket on the motherboard Note1: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Note2: The motherboard might equip with two different types of pin cap. Please refer below instruction to remove the pin cap.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Step 4: Hold processor with your thumb and index fingers, oriented as shown. Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket. Note1: The LGA1155 CPU is not compatible with LGA 1150 socket. Do not install a LGA 1155 CPU on the LGA 1150 socket. Note2: The CPU fits only in one correct orientation. Do not force the CPU into the socket to prevent damaging the CPU.
Motherboard Manual 2.2 Install a Heatsink Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest to the CPU fan connector. Ensure the fastener slots are pointing perpendicular to the heatsink. Step 2: Press down two fasteners at one time in a diagonal sequence to secure the CPU fan assembly in place. As each fastener locks into position a click should be heard.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 2.3 Connect Cooling Fans These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. CPU_FAN1: CPU Fan Header Pin 1 Assignment Ground 2 3 +12V 4 Smart Fan Control (By Fan) FAN RPM rate sense SYS_FAN1/2/3/4: System Fan Header Pin Assignment 1 Ground 2 3 +12V FAN RPM rate sense Note: CPU_FAN1, SYS_FAN1/2/3/4 support 4-pin and 3-pin head connectors.
Motherboard Manual 2.4 Install System Memory DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips snap back in place and the DIMM is properly seated. Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB/8GB DDR3_A2 512MB/1GB/2GB/4GB/8GB DDR3_B1 512MB/1GB/2GB/4GB/8GB DDR3_B2 512MB/1GB/2GB/4GB/8GB Total Memory Size Max is 32GB. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
Motherboard Manual PEX16_1: PCI-Express Gen3 x16 Slot - PCI-Express 3.0 compliant. Maximum theoretical realized bandwidth of 16GB/s simultaneously per direction, for an aggregate of 32GB/s totally. PEX16_2: PCI-Express Gen2 x4 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 2GB/s simultaneously per direction, for an aggregate of 4GB/s totally. PEX1_1/1_2: PCI-Express Gen2 x1 Slots - PCI-Express 2.0 compliant.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 2.6 Jumper Setting The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin1-2 closed JCMOS1: Clear CMOS Jumper Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default).
Motherboard Manual 2.7 Headers & Connectors ATXPWR1: ATX Power Source Connector For better compatibility, we recommend to use a standard ATX 24-pin power supply for this connector. Make sure to find the correct orientation before plugging the connector. Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D PANEL1: Front Panel Header This 16-pin header includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel This header allows user to add additional USB ports on the PC front panel, and also can be connected with a wide range of external peripherals. Pin 1 2 3 4 5 6 7 8 9 10 Assignment VBUS0 SSRX1SSRX1+ Ground SSTX1SSTX1+ Ground D1D1+ ID Pin 11 12 13 14 15 16 17 18 19 20 Assignment D2+ D2Ground SSTX2+ SSTX2Ground SSRX2+ SSRX2VBUS1 Key F_USB1/2: Header for USB 2.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D F_AUDIO1: Front Panel Audio Header This header allows user to connect the chassis-mount front panel audio I/O which supports HD and AC’97 audio standards.
Motherboard Manual J_COM1: Serial Port Header The motherboard has a serial port header for connecting RS-232 Port. Pin 1 2 3 4 5 6 7 8 9 10 Assignment Carrier detect Received data Transmitted data Data terminal ready Signal ground Data set ready Request to send Clear to send Ring indicator NC CIR1: Consumer IR Header This header is for infrared remote control and communication.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 2.8 Smart Switches & Indicators On-Board Buttons SW_PWR1: This is an on-board Power Switch button. SW_RST1: This is an on-board Reset button. BIOS POST Code/CPU Temperature Indicator This indicator will show POST code while booting. After the booting sequence, it will show current CPU temperature in Celsius. Please refer to Chapter 4.3 for all the BIOS POST codes.
Motherboard Manual CHAPTER 3: UEFI BIOS & SOFTWARE 3.1 z z 3.2 UEFI BIOS Setup The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual in the Setup DVD.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS. 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system. 8. While the system boots up and the full screen logo shows up, press key to enter BIOS setup.
Motherboard Manual 4. An open dialog will show up to request your agreement to start the BIOS update. Click Yes to start the online update procedure. 5. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed. 6. After the download is completed, you will be asked to program (update) the BIOS or not. Click Yes to proceed. 7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot. 8.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure. 5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open. It will take several minutes, please be patient. 6. After the BIOS Update process is finished, click on OK to reboot the system. 7.
Motherboard Manual 3.3 Software Installing Software 1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled. 2. 3. Select Software Installation, and then click on the respective software title. Follow the on-screen instructions to complete the installation. Launching Software After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D The OC Tweaker tab allows you to save or load the OC setting profiles, change system frequency and voltage settings. The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature. You can also set CPU Smart Fan function in this tab. Note1: Not all types of CPU perform above overclock setting ideally; the difference will be based on the selected CPU model.
Motherboard Manual eHot-Line eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Note: Before you use this utility, please set Outlook Express as your default e-mail client application program. represents important information that you must provide.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
Motherboard Manual Smart EAR 3D Hi-Fi 3D Audio Requirements: 1. A chassis with front audio output jacks 2. An earphone or a headphone 3. Speakers 4. Windows 7 or Windows 8 operation system Installation Guide: 1. Make sure the front audio cable of the chassis connected to the front audio header of the motherboard properly. 2. Install the Smart Ear 3D Utility from the driver DVD. 3. Connect the earphone or headphone to the front audio jack of the chassis for Smart Gain and 3D Sound Field functions. 4.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Smart EAR 3D Utility: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Rear Panel Audio Output Indicator: It displays a blue light when the audio output is from rear panel ports. 3D Sound Field Button: There are six sound environment options for achieving realistic listening experience. It displays a blue light when the 3D Sound Field is enabled. Smart PREAMP Button: Click this switch to turn on or off the Smart PREAMP function.
Motherboard Manual Smart Connect Technology Intel® Smart Connect Technology is designed to update programs by periodically waking your computer from sleep/standby mode for a short time. This function works with applications that automatically get their data from the Internet. System Requirement: z z z z Intel Smart Connect Technology enabled in BIOS Setup Set the “ACPI Sleep State” to S3 in BIOS Setup.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Basic and advanced settings Basic Tab Update Frequency slider: This slider bar sets the amount of time the feature waits to wake your computer and update your applications. Move the slider in the user interface to change the frequency. The slider bar can be set to wake and update your computer from every 15 to 60 minutes. The longer the time between updates the less power the feature consumes.
Motherboard Manual Rapid Start Technology Intel® Rapid Start technology enables your system to get up and running faster from even the deepest sleep, saving time and power consumption. Feel secure knowing that your system will still resume to working conditions in the event of unexpected power loss while in sleep mode. System Requirement: z z An Intel® SATA SSD (SATA Gen2 or Gen3.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 3-3 After rebooting, the system will setup Intel® Rapid Start Technology automatically. We recommend you restart the system after this installation is complete, Step 4: Configuring Intel® Rapid Start Application Launch the Intel® Rapid Start Technology Manager application from [Start] > [All Programs] > [Intel] or click the icon in the notification area.
Motherboard Manual Intel® Small Business Advantage Intel Small Business Advantage (Intel SBA) provides an out-of-the-box hardware-based security and productivity suite designed for the small business user. Software Monitor Software Monitor helps keep critical security software running by monitoring it at the hardware level and alerting the business if there has been an attack.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Installing Intel SBA This procedure describes how to install Intel SBA. 1. Logon to the computer with a user that has administrator privileges. 2. Copy the Setup.exe file to the computer. 3. Double-click Setup.exe. The Welcome to the Setup Program window opens. 4. Click Next. The installer starts the installation and the Setup Progress window opens showing the progress of the installation.
Motherboard Manual BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose BMP as your boot logo so as to customize your computer. Please follow the step-by-step instructions below to update boot logo: z Load Image:Choose the picture as the boot logo. z Transform:Transform the picture for BIOS and preview the result. z Update Bios:Write the picture to BIOS Memory to complete the update.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Green Power II Utility BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power phases, current power saving, and total power saving. This tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU Temperature. Moreover, it optimizes power saving and best power efficiency on your system.
Motherboard Manual CHAPTER 4: USEFUL HELP 4.1 Driver Installation After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system. A. Driver Installation To install the driver, please click on the Driver icon.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 4.2 AMI BIOS Beep Code Boot Block Beep Codes Number of Beeps Continuing Description Memory sizing error or Memory module not found POST BIOS Beep Codes Number of Beeps 1 8 4.3 Description Success booting.
Motherboard Manual Code Description 71 South Bridge DXE SMM initialization is started 72 South Bridge devices initialization 78 South Bridge DXE Initialization (South Bridge module specific) 79 ACPI module initialization 90 Boot Device Selection (BDS) phase is started 91 Driver connecting is started 92 PCI Bus initialization is started 93 PCI Bus Hot Plug Controller Initialization 94 PCI Bus Enumeration 95 PCI Bus Request Resources 96 PCI Bus Assign Resources 97 Console Output devices connect 98 Console i
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 4.4 Troubleshooting Probable 1. 2. There is no power in the system. Power LED does not shine; the fan of the power supply does not work Indicator light on keyboard does not shine. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.
Motherboard Manual 4.5 RAID Functions RAID Definitions RAID 0: In a RAID 0 system data are split up in blocks that get written across all the drives in the array. By using multiple disks (at least 2) at the same time, this offers superior I/O performance. This performance can be enhanced further by using multiple controllers, ideally one controller per disk. Features and Benefits Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D RAID 10: RAID 10 combines the advantages (and disadvantages) of RAID 0 and RAID 1 in one single system. It provides security by mirroring all data on a secondary set of disks (disk 3 and 4 in the drawing below) while using striping across each set of disks to speed up data transfers. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Motherboard Manual APPENDIX: Specifications in Other Languages Arabic اﻟﻤﻮاﺻﻔﺎت اﻟﻤﺄﺧﺬ 1150ﻟﻤﻌﺎﻟﺞ اﻳﻪ إم دى Intel® Core i7 / i5 / i3 / Pentium / Celeron ﻗﺎﻋﺪة وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ اﻟﺤﺪ اﻷﻗﺼﻰ ﻟﻠﻄﺎﻗﺔ اﻟﺤﺮارﻳﺔ ﻓﻲ ﺗﺼﻤﻴﻢ اﻟﻤﻌﺎﻟﺞ ) 95 :( thermal design power – TDPواط. * ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ www.biostar.com.twﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﻤﻌﺎﻟﺞ .CPU ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ )INTEL® Z87 (Hi-Fi Z87S 3D )INTEL® B85 (Hi-Fi B85S 3D )INTEL® H87 (Hi-Fi H87S 3D ﺗﺪﻋﻢ ﻗﻨﺎة ﻣﺰدوﺟﺔ دي .
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D اﻟﻤﻮاﺻﻔﺎت Hi-Fi Z87S 3D & Hi-Fi H87S 3D اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺪاﺧﻠﻴﺔ Hi-Fi B85S 3D وﺻﻠﺔ 6 SATA x 6ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ وﺻﻠﺔ 6 SATA x 4ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﻣﻮزع x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 2.0 USBآﻞ وﺻﻠﺔ 3 SATA x 2ﺟﻴﺠﺎﺑﺎﻳﺖ /اﻟﺜﺎﻧﻴﺔ ﻣﻮزع ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 2.0 USB ﻣﻮزع x 2ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 2.0 USBآﻞ ﻣﻮزع ﻳﺘﺤﻤﻞ ﻣﻮزع x 1ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ) 3.0 USBآﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ( 2.
Motherboard Manual French Spécifications Socket 1150 Processeurs Intel® Core i7 / i5 / i3 / Pentium / Celeron Support Unité Centrale Enveloppe thermique Unité Centrale maximum : 95Watt * Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles d'Unité Centrale.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Spécifications I/O en interne Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D 6x Connecteur SATA 6.0Gb/s 4x Connecteur SATA 6.0Gb/s 2x embases USB 2.0 (chaque embase 2x Connecteur SATA 3.0Gb/s supporte 2 Ports USB 2.0) 2x embases USB 2.0 (chaque embase 1x embase USB 3.0 (chaque embase supporte 2 Ports USB 2.0) supporte 2 Ports USB 3.0) 1x embase USB 3.0 (chaque embase 1x 8-Broche de carte supporte 2 Ports USB 3.
Motherboard Manual German Spezifikationen Anschluss-1150 für Intel® Core i7 / i5 / i3 / Pentium / Celeron Prozessor CPU-Unterstützung Maximale CPU TDP (Thermal Design Power): 95 Watt * Bitte konsultieren Sie www.biostar.com.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Spezifikationen Interne I/Os Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D 6x SATA 6.0Gb/s-Verbinung 4x SATA 6.0Gb/s-Verbinung 2x USB 2.0-Header (jeder Header 2x SATA 3.0Gb/s-Verbinung unterstützt 2 USB 2.0-Ports) 2x USB 2.0-Header (jeder Header unterstützt 1x USB 3.0-Header (jeder Header 2 USB 2.0-Ports) unterstützt 2 USB 3.0-Ports) 1x USB 3.0-Header (jeder Header unterstützt 1x 8-Pin-Stromverbindung 2 USB 3.
Motherboard Manual Italian Specificazioni Supporto processore Tipo scheda Slot 1150 per processore Intel® Core i7 / i5 / i3 / Pentium / Celeron Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 95Watt * Si prega di consultare www.biostar.com.tw per la lista di supporto del processore.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Specificazioni Ingressi/ Uscite Interni Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D Connettore 6x SATA 6.0Gb/s Connettore 4x SATA 6.0Gb/s Distributore 2x USB 2.0 (ogni distributore Connettore 2x SATA 3.0Gb/s supporta 2 slot USB 2.0) Distributore 2x USB 2.0 (ogni distributore Distributore 1x USB 3.0 (ogni distributore supporta 2 slot USB 2.0) supporta 2 slot USB 3.0) Distributore 1x USB 3.
Motherboard Manual Japanese 仕様 Intel® Core i7 / i5 / i3 / Pentium / Celeron プロセッサの Socket 1150 CPU サポート 最大 CPU TDP (Thermal Design Power 最大放熱量):95 W *CPU サポート リストについては、www.biostar.com.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D 仕様 内蔵 I/O Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D 6x SATA 6.0Gb/s コネクタ 4x SATA 6.0Gb/s コネクタ 2x USB 2.0 ヘッダー (各ヘッダーは、2つ 2x SATA 3.0Gb/s コネクタ の USB 2.0 ポートをサポートしています) 2x USB 2.0 ヘッダー (各ヘッダーは、2つの 1x USB 3.0 ヘッダー (各ヘッダーは、2つ USB 2.0 ポートをサポートしています) の USB 3.0 ポートをサポートしています) 1x USB 3.0 ヘッダー (各ヘッダーは、2つの 1x 8-Pin パワー コネクタ USB 3.
Motherboard Manual Polish Specyfikacje techniczne Gniazdo procesora (Socket) 1150 dla procesorów Intel® Core i7 / i5 / i3 / Pentium / Celeron Obsługa procesora Moc Wydzielanego Ciepła (TDP - Thermal Design Power): 95Watt * Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej www.biostar.com.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Specyfikacje techniczne Wewnętrzne porty wejścia/ wyjścia Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D Złącza 6x SATA 6.0Gb/s Złącza 4x SATA 6.0Gb/s Złącza 2x USB 2.0 (każde złącze Złącza 2x SATA 3.0Gb/s obsługuje dodatkowe 2 porty USB 2.0) Złącza 2x USB 2.0 (każde złącze obsługuje Złącze 1x USB 3.0 (każde złącze dodatkowe 2 porty USB 2.0) obsługuje dodatkowe 2 porty USB 3.0) Złącze 1x USB 3.
Motherboard Manual Portuguese Especificações Porta 1150 para processador Intel® Core i7 / i5 / i3 / Pentium / Celeron Suporte Processador Alimentação de Design Térmico (TDP – Thermal Design Power): 95Watt * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do processador.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Especificações Conectores na placa Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D Conector 6x SATA 6.0Gb/s Conector 4x SATA 6.0Gb/s Dispositivo 2x USB 2.0 (cada Dispositivo Conector 2x SATA 3.0Gb/s suporta 2 portas USB 2.0) Dispositivo 2x USB 2.0 (cada Dispositivo Dispositivo 1x USB 3.0 (cada Dispositivo suporta 2 portas USB 2.0) suporta 2 portas USB 3.0) Dispositivo 1x USB 3.0 (cada Dispositivo Conector de 8 pinos x1 suporta 2 portas USB 3.
Motherboard Manual Russian Спецификации Поддержка Сокет 1150 для процессоров Intel® Core i7 / i5 / i3 / Pentium / Celeron центрального Максимальный термопакет центрального процессора (TDP): 95 ватт процессора * Перечень поддержки центрального процессора смотрите на www.biostar.com.tw.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Спецификации Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D Соединитель 6x SATA 6 Гб/с Соединитель 4x SATA 6 Гб/с 2 контакта USB 2.0 (каждый контакт Соединитель 2x SATA 3 Гб/с поддерживает 2 порта USB 2.0) 2 контакта USB 2.0 (каждый контакт 1 контакт USB 3.0 (каждый контакт поддерживает 2 порта USB 2.0) поддерживает 2 порта USB 3.0) 1 контакт USB 3.0 (каждый контакт 1 8-выводный разъем питания поддерживает 2 порта USB 3.
Motherboard Manual Spanish Especificaciones Ranura 1150 para procesador Intel® Core i7 / i5 / i3 / Pentium / Celeron Compatibilidad con el procesador Alimentación de Proyección Térmica (TDP – Thermal Design Power): 95Watt *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el procesador.
Hi-Fi Z87S 3D/Hi-Fi H87S 3D/Hi-Fi B85S 3D Especificaciones Hi-Fi Z87S 3D & Hi-Fi H87S 3D Hi-Fi B85S 3D Conector 6x SATA 6Gb’s Conector 4x SATA 6Gb’s Distribuidor 2x USB 2.0 (cada Conector 2x SATA 3Gb’s distribuidor soporta 2 ranuras USB 2.0) Distribuidor 2x USB 2.0 (cada distribuidor Distribuidor 1x USB 3.0 (cada soporta 2 ranuras USB 2.0) distribuidor soporta 2 ranuras USB 3.0) Distribuidor 1x USB 3.0 (cada distribuidor Conector con 8 patillas x1 soporta 2 ranuras USB 3.