A880GU3Z/A880GZ Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ........................................ 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................ 1 Package Checklist ............................................................................. 1 Motherboard Features...................................................................... 2 Rear Panel Connectors ..................................................................... 3 Motherboard Layout...
A880GU3Z/A880GZ CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES A880GU3Z CPU A880GZ Socket AM3+ Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX AMD Sempron/Athlon II/Phenom II/FX processors processors AMD 64 Architecture enables 32 and 64 bit AMD 64 Architecture enables 32 and 64 bit computing computing Supports Hyper Transport 3.0 and Cool=n=Quiet Supports Hyper Transport 3.0 and Cool=n=Quiet FSB Chipset (Maximum Watt: 125W) (Maximum Watt: 125W) Support HyperTransport 3.0 Support HyperTransport 3.
A880GU3Z/A880GZ A880GU3Z On Board Connector A880GZ SATA Connector x4 SATA Connector Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 S/PDIF Out Connector x1 S/PDIF Out Connector x1 CPU Fan Header x1 CPU Fan Header x1 System Fan Header x1 System Fan Header x1 CMOS clear Header x1 CMOS clear Header x1 USB 2.0 Connector x2 USB 2.
Motherboard Manual 1.5 MOTHERBOARD LAYOUT C PU _FAN 1 USBKBMS1 ATX PW R 2 HDMI1 D DR 3_ B 1 ATXP W R1 D DR 3_ A 1 DVI1 Socket AM 3+ JUSBV1 VGA1 JU SBV3 BAT1 R J45U SB1 AMD 880G AUDIO1 JCMO S1 LAN SATA4 SATA3 BIOS P E X16_1 Super I/O AMD SB850 PCI1 PCI2 SATA2 Codec CIR 1 J_PR IN T1 J_COM 1 F_US B 1 F_US B2 SATA1 JUS BV 2 F_AUDIO1 JSP DI FO UT1 Note: ■ represents the 1st pin.
A880GU3Z/A880GZ CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the CPU_FAN1. This completes the installation.
A880GU3Z/A880GZ 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. CPU_FAN1: CPU Fan Header 1 4 Pin 1 2 3 4 Assignment Ground +12V FAN RPM rate sense Smart Fan Control (By Fan) SYS_FAN1: System Fan Header Pin 1 2 3 1 Assignment Ground +12V FAN RPM rate sense 3 Note: CPU_FAN1 supports 4-pin head connector.
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY D D R 3_A 1 DDR 3_ B 1 A. Memory Modules 8 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
A880GU3Z/A880GZ B. Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB DDR3_B1 512MB/1GB/2GB/4GB Total Memory Size Max is 8GB. C. Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table Dual Channel Status DDR3_A1 DDR3_B1 Disabled X O Disabled O X Enabled O O (O means memory installed, X means memory not installed.
Motherboard Manual 2.4 CONNECTORS AND SLOTS SATA1~SATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. Pin 1 2 3 4 5 6 7 SA TA4 SA TA3 SA TA2 SA TA1 7 4 Assignment Ground TX+ TXGround RXRX+ Ground 1 ATXPWR2: ATX Power Source Connector This connector will provide +12V to CPU power circuit.
A880GU3Z/A880GZ ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Motherboard Manual PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PEX16_1 PCI1~PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.
A880GU3Z/A880GZ CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. F _ US B 1 F _ US B 2 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground NC Key JUSBV1/JUSBV2/JUSBV3: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USBKBMS1.
A880GU3Z/A880GZ JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 1 Assignment +5V SPDIF_OUT Ground 3 F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.
Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (default). 3 3 1 1 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
A880GU3Z/A880GZ J_PRINT1: Printer Port Connector This header allows you to connector printer on the PC. Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 2 26 1 25 Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key CIR1: Consumer IR Connector This header is for infrared remote control and communication.
Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 OPERATING SYSTEM Supports Windows XP, Windows Vista, and Windows 7. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1. RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity. 4.
A880GU3Z/A880GZ RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual RAID 10: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits - - Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
A880GU3Z/A880GZ RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service.
Motherboard Manual CHAPTER 5: USEFUL HELP 5.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
A880GU3Z/A880GZ 5.2 SOFTWARE Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching Software After the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop.
Motherboard Manual After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .
A880GU3Z/A880GZ BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
A880GU3Z/A880GZ 5.3 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
Motherboard Manual BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
A880GU3Z/A880GZ 5.4 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
Motherboard Manual 5.5 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
A880GU3Z/A880GZ This page is intentionally left blank.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN A880GU3Z A880GZ CPU Sockel AM3+ AMD Sempron/Athlon II/Phenom II/FX Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.0 und Cool’n’Quiet (Maximales Watt: 125W) Sockel AM3+ AMD Sempron/Athlon II/Phenom II/FX Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.
A880GU3Z/A880GZ A880GU3Z SATA-Anschluss Fronttafelanschluss Front-Audioanschluss S/PDIF- Ausgangsanschluss CPU-Lüfter-Sockel System-Lüfter-Sockel Onboard-Ans "CMOS löschen"-Sockel chluss USB 2.0-Anschluss Stromanschluss (24-polig) Stromanschluss (4-polig) Verbraucher-IR Anschluss Druckeranschluss Anschluss Serieller Anschluss x4 x1 x1 x1 x1 x1 x1 x2 x1 x1 x1 x1 x1 PS/2-Tastatur / Maus HDMI-Anschluss VGA-Anschluss DVI-D-Anschluss Rückseiten-E LAN-Anschluss /A USB 2.0-Anschluss (durch SB850) USB 3.
Motherboard Manual FRENCH A880GU3Z UC Bus frontal Chipset Super E/S A880GZ Socket AM3+ Socket AM3+ Processeurs AMD Sempron/Athlon II/Phenom Processeurs AMD Sempron/Athlon II/Phenom II/FX II/FX L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64 bits bits Prend en charge Hyper Transport 3.0 et Prend en charge Hyper Transport 3.0 et Cool’n’Quiet Cool’n’Quiet (Watt maximum : 125W) (Watt maximum : 125W) Prend en charge Hyper Transport 3.
A880GU3Z/A880GZ A880GU3Z A880GZ Connecteur SATA x4 Connecteur SATA x4 Connecteur du panneau avant x1 Connecteur du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur de sortie S/PDIF x1 Connecteur de sortie S/PDIF x1 Embase de ventilateur UC x1 Embase de ventilateur UC x1 Embase de ventilateur système x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Embase d'effacement CMOS x1 x2 Connecteur USB 2.
Motherboard Manual ITALIAN A880GU3Z CPU FSB Chipset A880GZ Socket AM3+ Socket AM3+ Processori AMD Sempron/Athlon II/Phenom II/FX Processori AMD Sempron/Athlon II/Phenom II/FX L’architettura AMD 64 abilita la computazione 32 e 64 bit L’architettura AMD 64 abilita la computazione 32 e 64 bit Supporto di Hyper Transport 3.0 e Supporto di Hyper Transport 3.0 e Cool’n’Quiet (Watt massimo: 125W) Cool’n’Quiet (Watt massimo: 125W) Supporto di HyperTransport 3.0 fino a 5.
A880GU3Z/A880GZ A880GU3Z Connettori su scheda A880GZ Connettore SATA Connettore pannello frontale x4 x1 Connettore SATA Connettore pannello frontale x4 x1 Connettore audio frontale Connettore output SPDIF x1 x1 Connettore audio frontale Connettore output SPDIF x1 x1 Collettore ventolina CPU x1 Collettore ventolina CPU x1 Collettore ventolina sistema Collettore cancellaz ione CMOS x1 x1 Collettore ventolina sistema Collettore cancellaz ione CMOS x1 x1 Connettore USB 2.
Motherboard Manual SPANISH A880GU3Z CPU FSB A880GZ Conector AM3+ Conector AM3+ Procesadores AMD Sempron/Athlon II/Phenom Procesadores AMD Sempron/Athlon II/Phenom II/FX II/FX La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de 32 y 64 bits 32 y 64 bits Soporta las tecnologías Hyper Transport 3.0 y Soporta las tecnologías Hyper Transport 3.0 y Cool’n’Quiet Cool’n’Quiet (Vatio máximo: 125W) (Vatio máximo: 125W) Admite HyperTransport 3.
A880GU3Z/A880GZ A880GU3Z A880GZ Conector SATA X4 Conector SATA X4 Conector de panel frontal X1 Conector de panel frontal X1 Conector de sonido frontal X1 Conector de sonido frontal X1 Conector de salida S/PDIF X1 Conector de salida S/PDIF X1 Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1 Cabecera de ventilador de sistema X1 Conectores en placa Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1 Conector USB 2.0 X2 Conector USB 2.
Motherboard Manual PORTUGUESE A880GU3Z A880GZ CPU Socket AM3+ Processadores AMD Sempron/Athlon II/Phenom II/FX A arquitectura AMD 64 permite uma computação de 32 e 64 bits Suporta as tecnologias Hyper Transport 3.0 e Cool’n’Quiet (Watt máximo: 125W) Socket AM3+ Processadores AMD Sempron/Athlon II/Phenom II/FX A arquitectura AMD 64 permite uma computação de 32 e 64 bits Suporta as tecnologias Hyper Transport 3.0 e Cool’n’Quiet (Watt máximo: 125W) FSB Suporta a tecnologia HyperTransport 3.
A880GU3Z/A880GZ A880GU3Z Conector SATA Conector do painel frontal Conector de áudio frontal Conector de saída S/PDIF Conector da ventoinha da CPU Conector da ventoinha do sistema Conector para limpeza do CMOS Conectores Conector USB 2.0 na placa Conector de alimentação (24 pinos) Conector de alimentação (4 pinos) Conector de IR do consumidor Conector da para impressora Conector da Porta série Teclado / Rato PS/2 Porta HDMI Entradas/S Porta VGA aídas no Porta DVI-D Porta LAN painel Porta USB 2.
Motherboard Manual POLISH A880GU3Z Procesor FSB Chipset A880GZ Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX Procesory Architektura AMD 64 umożliwia przetwarzanie Procesory Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe 32 i 64 bitowe Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet (Maksymalny Watt: 125W) Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet (Maksymalny Watt: 125W) Obsługa HyperTransport 3.
A880GU3Z/A880GZ A880GU3Z Złącza wbudowan e A880GZ Złącze SATA x4 Złącze SATA x4 Złącze panela przedniego Przednie złącze audio x1 x1 Złącze panela przedniego Przednie złącze audio x1 x1 Złącze wyjścia S/PDIF x1 Złącze wyjścia S/PDIF x1 Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora systemowego x1 Złącze główkowe wentylatora systemowego x1 Złącze główkowe kasowania CMOS x1 Złącze USB 2.
Motherboard Manual RUSSIAN A880GU3Z Гнездо AM3+ Процессоры AMD Sempron/Athlon II/Phenom CPU II/FX (центральны Архитектура AMD 64 разрешать обработка й процессор) данных на 32 и 64 бит Поддержка Hyper Transport 3.0 и Cool’n’Quiet (Максимальный ватт: 125W) Поддержка HyperTransport 3.0 с пропускной FSB способностью до 5.2 GT/s A880GZ Гнездо AM3+ Процессоры AMD Sempron/Athlon II/Phenom II/FX Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport 3.
A880GU3Z/A880GZ A880GU3Z Встроенный разъём Разъём SATA x4 Разъём на лицевой панели x1 Входной звуковой разъём x1 Разъём вывода для S/PDIF x1 Контактирующее приспособление вентилятора центрального процессора x1 Контактирующее приспособление вентилятора системы x1 Открытое контактирующее приспособление CMOS x1 USB 2.
Motherboard Manual ARABIC A880GU3Z وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ A880GZ AM3+ﻣﻘﺒﺲ AM3+ﻣﻘﺒﺲ Aﻣﻘﺒﺲ AMD Sempron/Athlon II/Phenom II/FXﻣﻌﺎﻟﺠﺎت AMD Sempron/Athlon II/Phenom II/FXﻣﻌﺎﻟﺠﺎت إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transport 3.0ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transport 3.
A880GU3Z/A880GZ A880GU3Z اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ اﻟﻠﻮﺡﺔ A880GZ ﻣﻨﻔﺬ SATA ﻋﺪد4 ﻣﻨﻔﺬ SATA ﻋﺪد4 ﻣﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻣﺎﻣﻴﺔ ﻋﺪد 1 ﻣﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻣﺎﻣﻴﺔ ﻋﺪد 1 ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻋﺪد 1 ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻋﺪد 1 ﻣﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 ﻣﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 وﺹﻠﺔ ﻣﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ ﻋﺪد 1 وﺹﻠﺔ ﻣﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ ﻋﺪد 1 وﺹﻠﺔ ﻣﺮوﺡﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻣﺮوﺡﺔ اﻟﻨﻈﺎم ﻋﺪد 1 وﺹﻠﺔ ﻣﺴﺢ CMOS ﻋﺪد 1 و
Motherboard Manual JAPANESE A880GU3Z A880GZ Socket AM3+ Socket AM3+ AMD Sempron/Athlon II/Phenom II/FX プロセッ AMD Sempron/Athlon II/Phenom II/FX プロセッ サ サ CPU FSB AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計 算が可能です 算が可能です ハイパートランスポート3.0とクールアンドクワイア ハイパートランスポート3.0とクールアンドクワイア ットをサポートします ットをサポートします (最高のワット: 125W) (最高のワット: 125W) 5.2 GT/sのバンド幅までハイパートランスポート3.0 5.2 GT/sのバンド幅までハイパートランスポート3.
A880GU3Z/A880GZ A880GU3Z オンボード コネクタ A880GZ SATAコネクタ x4 SATAコネクタ x4 フロントパネルコネクタ x1 フロントパネルコネクタ x1 フロントオーディオコネクタ x1 フロントオーディオコネクタ x1 S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1 CPUファンヘッダ x1 CPUファンヘッダ x1 システムファンヘッダ x1 システムファンヘッダ x1 CMOSクリアヘッダ x1 CMOSクリアヘッダ x1 USB 2.0コネクタ x2 USB 2.