Owner's Manual

945P-A7B/945PL-A7B BIOS Manual
9
CPU FEATURE
Delay Prior to Thermal
Set this item to enable the CPU Thermal function to engage after the specified time.
The Choices: 4Min, 8Min, 16Min (default), 32Min.
Thermal Management
Allow you to choose the thermal management method of your monitor.
The Choices: Thermal Monitor 1 (default), Thermal Monitor2.
Notes: The choices will be different according to your CPU f eatures.
TM2 Bus Ratio
Represents the frequency. Bus ratio of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
Min= 0, Max= 255, Key in a DEC number.
The Choices: 0X (default).
TM2 Bus VID
Represents the voltage of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
The Choices: 0.8375V (default), Min=0.8375V, Max=1.6000.
Limit CPU ID Max Val
Set limit CPU ID maxi mum vale to 3, it should be disabled for Win XP.
The Choices: Disabled (default), Enabled.