Owner's Manual

945P-A7B/945PL-A7B

c. “Auto-overclock button”: User can click this button and

[WarpSpeeder™] will set the best and stable performance and

frequency automatically. [WarpSpeeder™] utility will execute a

series of testing until system fail. Then system will do fail-safe

reboot by using Watchdog function. After reboot, the

[WarpSpeeder™] utility will restore to the hardware default

setting or load the verified best and stable frequency according

to the Recovery Dialog’s setting.

d. “Verify button”: User can click this button and [WarpSpeeder™]

will proceed a testing for current frequency. If the testing is ok,

then the current frequency will be saved into system registry. If

the testing fail, system will do a fail-safe rebooting. After reboot,

the [WarpSpeeder™] utility will restore to the hardware default

setting or load the verified best and stable frequency according

to the Recovery Dialog’s setting.

Note:

Because the testing programs, invoked in Auto-overclock and Verify,

include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or

newer runtime library is required. And please make sure y our display

card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is

required f or Direct3D rendering.

5. Hardware Monitor Panel

Cli ck the Hardware Monitor button i n Main Panel, the button will be

highlighted and the Hardware Monitor panel will slide out to left as

the following figure.

In this panel, you can get the real-time status information of your

sy stem. The information will be refreshed every 1 second.