User`s manual

945P-A7A / 945PL-A7A
2
System Memory
Supports dual channel DDR2.
- 945P Chipset supports up to 8 Banks DDR2
- 945PL Chipset supports up to 4 Banks DDR2
Supports DDR2 memory module for a theoretical maximum
bandwidth of 10.7 GB/s.
- 945P Chipset supports DDR2 533 (266MHz) / 667 (333MHz)
- 945PL Chipset supports DDR2 400 (200MHz) / 533 (266MHz)
Supports 256MB, 512MB, or 1GB DDR technologies for x8 and
x16 devices.
Supports non-ECC DIMMs.
Maximum DRAM capacity
- For 945P Chipset the maximum memory capacity is 4GB.
DIMM Socket
Location
DDR Module Total Memory Size
DDR2_A1 256MB/512MB/1GB *1
DDR2_A2 256MB/512MB/1GB *1
DDR2_B1 256MB/512MB/1GB *1
DDR2_B2 256MB/512MB/1GB *1
945P Chipset
Max memory 4GB.
- For 945PL Chipset the maximum memory capacity is 2GB.
DIMM Socket
Location
DDR Module Total Memory Size
DDR2_A1 256MB/512MB/1GB *1
DDR2_B1 256MB/512MB/1GB *1
Max memory 2GB.
On Board IDE (IDE1)
One on-board connector supports 2 devices.
Supports PIO Mode 0~4.
Supports Ultra DMA 33/66/100 Bus Master Mode.
10/100 LAN
Chip: RTL 8100C.
Supports 10 Mb/s and 100 Mb/s auto-negotiation.
Half/Full duplex capability.
Supports ACPI power management.