User`s manual

945P-A7A / 945PL-A7A
1
CHAPTER 1: INTRODUCTION
1.1 MOTHERBOARD FEATURES
CPU
Supports LGA 775.
Supports Intel Pentium 4 processor up to 3.8GHz.
Supports Intel Pentium D processor.
Supports Intel Celeron D processor
Front Side Bus at the following frequency ranges:
- 533MT/s (133MHz Core Clock)
- 800MT/s (200MHz Core Clock)
- 1066MT/s (266MHz Core Clock) (945P Chipset Only)
Supports Hyper-Threading Technology. (HT)
Supports Execute Disable Bit Technology (XD).
Supports Enhanced Intel SpeedStep® Technology (EIST).
Supports Intel Extended Memory 64 Technology (Intel EM64T).
WARNING!
Warranty will be void if the pin protection cap is not in place to protect the CPU socket
pin when sending this mainboard for service.
Chipset
North Bridge: Intel 945P / 945PL.
South Bridge: Intel ICH7.
Dimensions
ATX Form Factor: 20.5cm (W) x 30.5cm (L)
Operating System Supporting
Supports Windows 2000, and Windows XP.
Super I/O
Chip: ITE IT8712F.
Low Pin Count Interface.
Provides the most commonly used legacy Super I/O functionality.
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function