Owner's Manual

945GZ Micro 775

Parallel Port Mode

This item allows you to determine how the parallel port should function. The

default value is SPP.

The Choices:

SPP (default) Using Parallel port as Standard Printer Port.

EPP Using Parallel Port as Enhanced Parallel Port.

ECP Using Parallel port as Extended Capabilities Port.

ECP+EPP Using Parallel port as ECP & EPP mode.

ECP Mode Use DMA

Select a DMA Channel for the port.

The Choices: 3 (default), 1.

POWER After PWR-Fail

This setting specifies how your system should behave after a power fail or

interrupts occurs. By choosing off will leave the computer in the power off

state. Choosing On will reboot the computer. Former-Sts will restore the

system to the status before power failure or interrupt occurs.

The Choices: Off (default), On, Former-Sts.