Owner's Manual

945GZ Micro 775
22
On-Chip Serial ATA
This item allows you to choose between the options below:
Disabled: disabled SATA Controller
Combined Mode: PATA and SATA are combined max of 2 IDE drivers in each
channel.
Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers are
supported.
SATA Only: SATA is operating in legacy mode.
The Choices: Default, Auto, Combined Mode, Enhanced Mode (default), and
SATA only.
SATA PORT Speed Settings
This item allows you to set SATA PORT Speed.
The Choices: Disabled (default), Force GEM I, Force GEM II.
PATA IDE Mode
This item allows you to select PATA IDE Mode.
The Choices: Primary (default), Secondary.
Onboard Device
Highlight the “Press Enter” label next to the “Onboard Device” label and press
the enter key will take you a submenu with the following options: