945G Micro 775SE & 945GZ Micro 775 Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction.......................................... 1 1.1 1.2 1.3 1.4 1.5 1.6 Before You Start ................................................................................1 Package Checklist.............................................................................1 Motherboard Features......................................................................2 Rear Panel Connectors .....................................................................
945G Micro 775SE & 945GZ Micro 775 CHAPTER 1: INTRODUCTION BEFORE YOU START 1.1 Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES 945G Micro 775SE CPU FSB Chipset Graphics Super I/O Main Memory IDE SATA 945GZ Micro 775 LGA 775 LGA 775 Intel Core2Duo / Pentium 4 / Pentium D / Intel Core2Duo / Pentium 4 / Pentium D / Celeron D processor up to 3.8 GHz Celeron D processor up to 3.
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Back Panel I/O Board Size 945GZ Micro 775 Printer Port Connector x1 Printer Port Connector x1 SATA Connector x4 SATA Connector x4 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 CD-in Connector x1 CD-in Connector x1 SPDIF in connector (optional) x1 SPDIF in connector (optional) x1 S/PDIF out connector x1 S/PDIF out connector x1 CPU Fan header x1 CPU Fan header x1 System
Motherboard Manual 1.5 MOTHERBOARD LAYOUT (945G MICRO 775SE) JKBMS1 JATXPWR2 LGA775 COM1 JCOM1 DDR2_A1 JVGA1 DDR2_B1 CPU1 JATXPWR1 JRJ45USB1 IDE1 Intel 945G JCFAN1 FDD1 JUSB2 Super I/O JAUDIO1 JAUDIO2 PCI-EX16 JCMOS1 Codec JSPDIF_OUT1 JCDIN1 PCI-EX1_1 JCI1 (optional) BIOS Intel ICH7 JSPDIF_IN (optional) PCI1 BAT1 SATA3 JSFAN1 SATA1 LAN PCI2 SATA4 JUSB3 Note: ■ represents the 1st pin.
945G Micro 775SE & 945GZ Micro 775 1.6 MOTHERBOARD LAYOUT (945GZ MICRO 775) JKBMS1 JATXPWR2 LGA775 COM1 JCOM1 DDR2_B1 DDR2_A1 JVGA1 JPRNT1 CPU1 JATXPWR1 JRJ45USB1 IDE1 Intel 945GZ JCFAN1 FDD1 JUSB2 Super I/O JAUDIO1 JAUDIO2 PCI-EX BIOS JCMOS1 JCI1 (optional) PCI1 Codec JCDIN1 JSPDIF_OUT1 JSPDIF_IN1 (optional) PCI2 Intel ICH7 BAT1 SATA3 JSFAN1 SATA1 LAN PCI3 SATA4 JUSB3 JUSB4 JPANEL1 SATA2 IR (optional) Note: ■ represents the 1st pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin-Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
45G Micro 775SE & 945GZ Micro 775 Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1.
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
945G Micro 775SE & 945GZ Micro 775 2.3 INSTALLING SYSTEM MEMORY A. DDR2 module DDR2_A1 DDR 2_B1 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B.
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 1 33 34 IDE1: Hard Disk Connectors The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
945G Micro 775SE & 945GZ Micro 775 PCI-Ex16: PCI-Express x16 Slot - PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. PCI-Ex1_1: PCI-Express x1 slots (945G Micro 775SE only) - PCI-Express 1.0a compliant. Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth over the traditional PCI architecture.
Motherboard Manual PCI1~PCI3: Peripheral Component Interconnect Slots 945G Micro 775SE is equipped with 2 standard PCI slots, and 945GZ Micro 775 is equipped with 3 PCI standard PCI Slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.
945G Micro 775SE & 945GZ Micro 775 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS JPANEL1: Front Panel Header This 24-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button, speaker and IrDA Connection.
Motherboard Manual JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. 24 12 Pin 1 2 3 4 5 6 7 8 9 10 11 12 1 13 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage +5V +12V +12V 2 x 12 Detect +3.3V -12V Ground PS_ON Ground Ground Ground -5V +5V +5V +5V Ground JATXPWR2: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit.
945G Micro 775SE & 945GZ Micro 775 JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel This motherboard provides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.
Motherboard Manual JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. Pin 1 1 4 2 3 4 Assignment Left Channel Input Ground Ground Right Channel Input JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard.
945G Micro 775SE & 945GZ Micro 775 JCI1: Chassis Open Header This connector allows system to monitor PC case open status. If the signal has been triggered, it will record to the CMOS and show the message on next boot-up. Pin 1 2 1 2 Assignment Case open signal Ground JSATA1~JSATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.
Motherboard Manual JSPDIF_OUT1: Digital Audio out Connectors This connector allows user to connect the PCI bracket SPDIF output header. 1 Pin 1 2 3 3 Assignment +5V SPDIF_OUT1 Ground JSPDI_IN1: Digital Audio in Connectors (optional) This connector allows user to connect the PCI bracket SPDIF input header.
945G Micro 775SE & 945GZ Micro 775 JPRNT1: Printer Port Connector This header allows you to connector printer on the PC.
Motherboard Manual CHAPTER 4: USEFUL HELP 4.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
945G Micro 775SE & 945GZ Micro 775 4.2 AWARD BIOS BEEP CODE Beep Sound Meaning One long beep followed by two short beeps Video card not found or video card memory bad High-low siren sound CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second 4.3 No DRAM detected or install EXTRA INFORMATION A.
Motherboard Manual B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
945G Micro 775SE & 945GZ Micro 775 4.4 TROUBLESHOOTING Probable 1. 2. Solution 1. No power to the system at all Power light don’t illuminate, fan inside power supply does not turn 2. on. 3. Indicator light on keyboard does not turn on. System inoperative. Keyboard lights are on, power indicator lights are lit, and hard drive is spinning. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
Motherboard Manual CHAPTER 5: WARPSPEEDER™ 5.1 INTRODUCTION [WarpSpeeder™], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
945G Micro 775SE & 945GZ Micro 775 5.3 INSTALLATION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish” button.
Motherboard Manual 5.4 1. WARPSPEEDER™ Tray Icon: Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure.
945G Micro 775SE & 945GZ Micro 775 2. Main Panel If you click the tray icon, [WarpSpeeder™] utility will be invoked. Please refer to the following figure; the utility’s first window you will see is Main Panel. Main Panel contains features as follows: a. b. c. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels.
Motherboard Manual 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is “No”. If you want to get the best performance of overclocking, we recommend you click the option “Yes”.
945G Micro 775SE & 945GZ Micro 775 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %.
Motherboard Manual c. “Auto-overclock button”: User can click this button and [WarpSpeeder™] will set the best and stable performance and frequency automatically. [WarpSpeeder™] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting. d.
945G Micro 775SE & 945GZ Micro 775 6. About Panel Click the “about” button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard’s BIOS model and the Version number of [WarpSpeeder™] utility.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN 945G Micro 775SE CPU FSB Chipsatz Grafik Super E/A LGA 775 LGA 775 Intel Core2Duo / Pentium 4 / Pentium D / Intel Core2Duo / Pentium 4 / Pentium D / Celeron D Prozessoren mit bis zu 3,8 GHz Celeron D Prozessoren mit bis zu 3,8 GHz Unterstützt Hyper-Threading Unterstützt Hyper-Threading Execute Disable Bit Execute Disable Bit Enhanced Intel SpeedStep® Enhanced Intel SpeedStep® Extended Memory 64 Technology Extended Memory 64 Tec
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE 945GZ Micro 775 AC’97 Version 2.3 Steckplätze AC’97 Version 2.
Motherboard Manual FRANCE 945G Micro 775SE UC LGA 775 LGA 775 Processeurs Intel Core2Duo / Pentium 4 / Processeurs Intel Core2Duo / Pentium 4 / Pentium D / Celeron D jusqu'à 3,4 GHz Pentium D / Celeron D jusqu'à 3,4 GHz Prend en charge les technologies Prend en charge les technologies Hyper-Threading Hyper-Threading d'exécution de bit de désactivation d'exécution de bit de désactivation Intel SpeedStep® optimisée Intel SpeedStep® optimisée de mémoire étendue 64 Bus frontal 533 / 800 / 1066
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Fentes Connecteur embarqué 945GZ Micro 775 PCI Express x16 Steckplatz x1 PCI Express x1 Steckplatz x1 PCI Express x16 Steckplatz x1 Fente PCI x2 Fente PCI x3 Connecteur de disquette Connecteur IDE x1 Connecteur de disquette x1 x1 Connecteur IDE x1 Connecteur de Port d'imprimante Connecteur SATA x1 Connecteur de Port d'imprimante x1 x4 Connecteur SATA x4 Connecteur du panneau avant x1 Connecteur du panneau avant x1 Connecteur
Motherboard Manual ITALIAN 945G Micro 775SE CPU FSB Chipset Grafica Super I/O 945GZ Micro 775 LGA 775 LGA 775 Processore Intel Core2Duo / Pentium 4 / Processore Intel Core2Duo / Pentium 4 / Pentium D / Celeron D fino a 3.8 GHz Pentium D / Celeron D fino a 3.
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Codec audio Alloggi 945GZ Micro 775 ALC 655 ALC 655 Uscita audio 6 canali Uscita audio 6 canali AC’97 Versione 2.3 AC’97 Versione 2.
Motherboard Manual SPANISH 945G Micro 775SE CPU FSB 945GZ Micro 775 LGA 775 LGA 775 Procesador Intel Core2Duo / Pentium 4 / Procesador Intel Core2Duo / Pentium 4 / Pentium D / Celeron D hasta 3,8 GHz Pentium D / Celeron D hasta 3,8 GHz Admite Hyper-Threading Admite Hyper-Threading Bit de deshabilitación de ejecución Bit de deshabilitación de ejecución Intel SpeedStep® Mejorado Intel SpeedStep® Mejorado Tecnología Extended Memory 64 Tecnología Extended Memory 64 533 / 800 / 1066 MHz 533 /
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Conectores en placa 945GZ Micro 775 Conector disco flexible X1 Conector disco flexible X1 Conector IDE X1 Conector IDE X1 Conector Puerto de impresora X1 Conector Puerto de impresora X1 Conector SATA X4 Conector SATA X4 Conector de panel frontal X1 Conector de panel frontal X1 Conector de sonido frontal X1 Conector de sonido frontal X1 Conector de entrada de CD X1 Conector de entrada de CD X1 Conector de entrada S/PDIF x1 C
Motherboard Manual PORTUGUESE 945G Micro 775SE CPU FSB Chipset Placa gráfica 945GZ Micro 775 LGA 775 LGA 775 Processador Intel Core2Duo / Pentium 4 / Processador Intel Core2Duo / Pentium 4 / Pentium D / Celeron D até 3,8 GHz Pentium D / Celeron D até 3,8 GHz Suporta as tecnologias Hyper-Threading Suporta as tecnologias Hyper-Threading Execute Disable Bit Execute Disable Bit Enhanced Intel SpeedStep® Enhanced Intel SpeedStep® Extended Memory 64 Extended Memory 64 533 / 800 / 1066 MHz 533
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Ranhuras Conectores na placa 945GZ Micro 775 Ranhura PCI Express x16 x1 Ranhura PCI Express x1 x1 Ranhura PCI Express x16 x1 Ranhura PCI x2 Ranhura PCI x3 Conector da unidade de disquetes x1 Conector da unidade de disquetes x1 Conector IDE x1 Conector IDE x1 Conector da para impressora x1 Conector da para impressora x1 Conector SATA x4 Conector SATA x4 Conector do painel frontal x1 Conector do painel frontal x1 Conector de
Motherboard Manual POLISH 945G Micro 775SE LGA 775 945GZ Micro 775 LGA 775 Procesor Intel Core2Duo / Pentium 4 / Pentium D Procesor Intel Core2Duo / Pentium 4 / Pentium D / Celeron D do 3,4 GHz Procesor Obsługa Hyper-Threading Obsługa Hyper-Threading Execute Disable Bit Execute Disable Bit Enhanced Intel SpeedStep® FSB Chipset Grafika Pamięć główna Super I/O IDE SATA LAN Kodek dźwiękowy 42 / Celeron D do 3,4 GHz Enhanced Intel SpeedStep® Extended Memory 64 Technology Extended Memory 64
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Gniazda Złącza wbudowane 945GZ Micro 775 Gniazdo PCI Express x16 x1 Gniazdo PCI Express x1 x1 Gniazdo PCI Express x16 x1 Gniazdo PCI Złącze napędu dyskietek x2 Gniazdo PCI x3 x1 Złącze napędu dyskietek x1 Złącze IDE Złącze Port drukarki x1 Złącze IDE x1 x1 Złącze Port drukarki x1 Złącze SATA x4 Złącze SATA x4 Złącze panela przedniego x1 Złącze panela przedniego x1 Przednie złącze audio x1 Przednie złącze audio x1 Złącze
Motherboard Manual RUSSIAN 945G Micro 775SE CPU 945GZ Micro 775 LGA 775 LGA 775 Процессор Intel Core2Duo / Pentium 4 / Процессор Intel Core2Duo / Pentium 4 / Pentium D / Celeron D до 3.8 ГГц Pentium D / Celeron D до 3.
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE Слоты 945GZ Micro 775 Слот PCI Express x16 x1 Слот PCI Express x1 x1 й разъём x2 Слот PCI x3 Разъём НГМД x1 Разъём НГМД x1 Разъём IDE x1 Разъём IDE x1 Разъём Порт подключения принтера x1 Разъём Порт подключения принтера x1 Разъём SATA x4 Разъём SATA x4 Разъём на лицевой панели x1 Разъём на лицевой панели x1 Входной звуковой разъём x1 Входной звуковой разъём x1 Разъём ввода для CD x1 Разъём ввода для CD x1 Разъём ввода
Motherboard Manual ARABIC 945GZ Micro 775 945G Micro 775SE LGA 775 LGA 775 Intel Core2Duo / Pentium 4 / Pentium D /ﻡﻌﺎﻟﺠﺎت Intel Core2Duo / Pentium 4 / Pentium D /ﻡﻌﺎﻟﺠﺎت وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ 3.8ﺝﻴﺠﺎ هﺮﺕﺰCeleron D ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ 3.
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ اﻟﻠﻮﺣﺔ ﻡﻨﺎﻓﺬ دﺧﻞ/ﺧﺮج اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ ﺣﺠﻢ اﻟﻠﻮﺣﺔ دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ 47 945GZ Micro 775 ﻋﺪد 1 ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ IDE ﻋﺪد 1 ﻡﻨﻔﺬ IDE ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ SATA ﻋﺪد 4 ﻡﻨﻔﺬ SATA ﻋﺪد 4 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1
Motherboard Manual JAPANESE 945G Micro 775SE CPU FSB チップセット グラフィック 945GZ Micro 775 LGA 775 LGA 775 Intel Core2Duo / Pentium 4 / Pentium D / Intel Core2Duo / Pentium 4 / Pentium D / Celeron D processor up to 3.8 GHz Celeron D processor up to 3.
945G Micro 775SE & 945GZ Micro 775 945G Micro 775SE スロット 945GZ Micro 775 PCI Express x16スロット x1 PCI Express x16スロット x1 PCI Express x1スロット x1 PCIスロット x2 PCIスロット x3 フロッピーコネクタ x1 フロッピーコネクタ x1 IDEコネクタ x1 IDEコネクタ x1 プリンタポートコネクタ x1 プリンタポートコネクタ x1 SATAコネクタ x4 SATAコネクタ x4 フロントパネルコネクタ x1 フロントパネルコネクタ x1 フロントオーディオコネクタ x1 フロントオーディオコネクタ x1 CDインコネクタ x1 CDインコネクタ x1 オンボードコ S/PDIFインコネクタ (オプション) x1 S/PDIFインコネクタ (オプション) x1 ネクタ S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1 CPUファンヘッダ x1 C
945GZ Micro 775 BIOS Setup ................................................................................................ 1 1 Main Menu ............................................................................................. 3 2 Standard CMOS Features..................................................................... 7 3 Advanced BIOS Features ...................................................................... 9 4 Advanced Chipset Features.........................................................
945GZ Micro 775 BIOS Setup Introduction The purpose of this manual is to describe the settings in the Award™ BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. The power of CMOS RAM is supplied by a battery so that it retains the Setup information when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk.
945GZ Micro 775 PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR SDRAM (Double Data Rate Synchronous DRAM) is supported. Supported CPUs This AWARD BIOS supports the Intel CPU. Using Setup Use the arrow keys to highlight items in most of the place, press to select, use the and keys to change entries, press for help and press to quit.
945GZ Micro 775 1 Main Menu Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions. Use the arrow keys to select among the items and press to accept and enter the sub-menu. Figure 1: Main Menu !! WARNING !! For better system performance, the BIOS firmware is being continuously updated. The BIOS information described in this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference only.
945GZ Micro 775 Advanced Chipset Features This submenu allows you to configure special chipset features. Integrated Peripherals This submenu allows you to configure certain IDE hard drive options and Programmed Input/ Output features. Power Management Setup This submenu allows you to configure the power management features. PnP/PCI Configurations This submenu allows you to configure certain “Plug and Play” and PCI options. PC Health Status This submenu allows you to monitor the hardware of your system.
945GZ Micro 775 Set Supervisor Password Setting the supervisor password will prohibit everyone except the supervisor from making changes using the CMOS Setup Utility. You will be prompted with to enter a password. Set User Password If the Supervisor Password is not set, then the User Password will function in the same way as the Supervisor Password. If the Supervisor Password is set and the User Password is set, the “User” will only be able to view configurations but will not be able to change them.
945GZ Micro 775 Upgrade BIOS This submenu allows you to upgrade bios.
945GZ Micro 775 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Figure 2: Standard CMOS Setup Main Menu Selections This table shows the items and the available options on the Main Menu. Item Options Description Date mm : dd : yy Set the system date.
945GZ Micro 775 Item Options Description IDE Secondary Master Options are in its sub menu. Press to enter the sub menu of detailed options. IDE Secondary Slave Options are in its sub menu. Press to enter the sub menu of detailed options. 360K, 5.25 in 1.2M, 5.25 in Drive A 720K, 3.5 in Drive B 1.44M, 3.5 in Select the type of floppy disk drive installed in your system. 2.88M, 3.5 in None EGA/VGA Video CGA 40 CGA 80 Select the default video device.
945GZ Micro 775 3 Advanced BIOS Features Figure 3: Advanced BIOS Setup CPU Feature 9
945GZ Micro 775 Delay Prior to Thermal Set this item to enable the CPU Thermal function to engage after the specified time. The Choices: 4 Min, 8 Min, 16Min (default), 32 Min. Thermal Management This option allows you to select the way to control the “Thermal Management.” The Choices: Thermal Monitor 1 (default), Thermal Monitor 2. TM2 Bus Ratio This option represents the frequency (bus ratio) of the throttled performance state that will be initiated when the on-die sensor detects temperature increase.
945GZ Micro 775 Cache Setup CPU L3 Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache.
945GZ Micro 775 Boot Seq & Floppy Setup This item allows you to setup boot sequence & Floppy. Hard Disk Boot Priority The BIOS will attempt to arrange the Hard Disk boot sequence automatically. You can change the Hard Disk booting sequence here. The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB HDD1, USB HDD2, and Bootable Add-in Cards.
945GZ Micro 775 First/Second/Third Boot Device The BIOS will attempt to load the operating system in this order. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN, HPT370, Disabled. Boot Other Device When enabled, BIOS will try to load the operating system from other device when it failed to load from the three devices above.
945GZ Micro 775 Quick Power On Self Test Enabling this option will cause an abridged version of the Power On Self-Test (POST) to execute after you power up the computer. Disabled Normal POST. Enabled (default) Enable quick POST. Boot Up NumLock Status Selects the NumLock State after the system switched on. The Choices: On (default) Numpad is number keys. Off Numpad is arrow keys. Gate A20 Option Select if chipset or keyboard controller should control Gate A20.
945GZ Micro 775 Security Option This option will enable only individuals with passwords to bring the system online and/or to use the CMOS Setup Utility. System: A password is required for the system to boot and is also required to access the Setup Utility. Setup (default): A password is required to access the Setup Utility only. This will only apply if passwords are set from the Setup main menu. APIC MODE Selecting Enabled enables APIC device mode reporting from the BIOS to the operating system.
945GZ Micro 775 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus. The default settings that came with your system have been optimized and therefore should not be changed unless you are suspicious that the settings have been changed incorrectly.
945GZ Micro 775 DRAM RAS# to CAS# Delay This field allows you to insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read from, or refreshed. Low value will provide a faster performance; and high value made the system more stable. This field applies only when synchronous DRAM is installed in the system. The Choices: Auto (default), 2, 3, 4, 5, 6.
945GZ Micro 775 DVMT Memory Size DVMT stands for „Dynamic Video Memory Technology“. This is an enhancement of the unified memory architecture (UMA) concept. DVMT will set the optimum amount of memory to be allocated for a balance between graphics and system performance. DVMT dynamically respond to system requirements and applications demands, by allocating the proper amount of display, texturing and buffer memory after the operating system has booted. The Choices: 64MB, 128MB (default).
945GZ Micro 775 Memory Hole At 15M-16M You can reserve this area of system memory for ISA adapter ROM. When this area is reserved it cannot be cached. Check the user information of peripherals that need to use this area of system memory for the memory requirements. The Choices: Disabled (default), Enabled. PCI Express Root Port Func PCI Express Port 1/2/3/4/5/6 This item allows you to select the PCI Express Port. The Choices: Auto (default), Enabled, Disabled.
945GZ Micro 775 5 Integrated Peripherals Figure 5.
945GZ Micro 775 IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sectors read / write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read / write per sector where the drive can support. The Choices: Enabled (default), Disabled.
945GZ Micro 775 On-Chip Serial ATA This item allows you to choose between the options below: Disabled: disabled SATA Controller Combined Mode: PATA and SATA are combined max of 2 IDE drivers in each channel. Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers are supported. SATA Only: SATA is operating in legacy mode. The Choices: Default, Auto, Combined Mode, Enhanced Mode (default), and SATA only. SATA PORT Speed Settings This item allows you to set SATA PORT Speed.
945GZ Micro 775 USB Controller Select enabled if your system contains a Universal Serial Bus (USB) controller and you use USB peripherals. The Choices: Enabled (default), Disabled USB 2.0 Controller This entry is to enabled/ disabled EHCI controller. The Choices: Enabled (default), Disabled. USB Keyboard Support This item allows you to enable or disable the USB Keyboard Legacy Support. Enabled Enable USB Keyboard Support. Disabled (default) Disable USB Keyboard Support.
945GZ Micro 775 Onboard LAN Boot ROM This item allows you to enable or disable the Onboard LAN Boot ROM. The Choices: Disabled (default), Enabled. Super IO Device Press Enter to configure the Super I/O Device. Onboard FDC Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. The Choices: Enabled (default), Disabled.
945GZ Micro 775 Parallel Port Mode This item allows you to determine how the parallel port should function. The default value is SPP. The Choices: SPP (default) Using Parallel port as Standard Printer Port. EPP Using Parallel Port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. ECP Mode Use DMA Select a DMA Channel for the port. The Choices: 3 (default), 1.
945GZ Micro 775 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6.
945GZ Micro 775 ACPI Function This item displays the status of the Advanced Configuration and Power Management (ACPI). The Choices: Enabled (default), Disabled. Wake-Up by PCI card When you select “Enable”, a PME signal from PCI card returns the system to Full On state. The Choices: Enabled, Disabled (default). Power On by Ring An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state.
945GZ Micro 775 Reload Timer Events Primary/Secondary IDE 0/1 You can enable or disable Primary or Secondary RAID 0 or RAID 1 function under this item. The Choices: Disabled (default), Enabled. FDD, COM, LPT Port You can enable or disable FDD, COM, and LPT port under this item. The Choices: Disabled (default), Enabled. PCI PIRQ [A-D]# You can enable or disable PCI PIRQ [A-D]# under this item. The Choices: Disabled (default), Enabled.
945GZ Micro 775 Minimum power management. Suspend Mode = 1 hr. HDD Power Down = 15 min Max. Power Saving Maximum power management only available for sl CPU’s. Suspend Mode = 1 min. HDD Power Down = 1 min. User Define (default) Allow you to set each option individually. When you choose user define, you can adjust each of the item from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min. to 15 min. Video Off Method This option determines the manner when the monitor goes blank.
945GZ Micro 775 Suspend Mode The item allows you to adjust the system idle time before suspend. The Choices: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min, 1 Hour (default). HDD Power Down When enabled, the hard-disk drives will power down after a set time of system inactivity. All other devices remain active. The Choices: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min (default).
945GZ Micro 775 7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
945GZ Micro 775 IRQ Resources This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. When you press the “Press Enter” tag, you will be directed to a submenu that will allow you to configure the system interrupts. This is only configurable when “Resources Controlled By” is set to “Manual”.
945GZ Micro 775 8 PC Health Status Figure 8: PC Health Status CPU FAN Control Choose “smart” to reduce the noise caused by CPU FAN. The Choices: Smart (default), Always On. Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. This item is only effective under Windows 98 ACPI mode. The Choices: Disabled (default) , 65℃/ 140℉, 70℃/ 149℉, 75℃/ 158℉. Show H/W Monitor in POST If you computer contains a monitoring system, it will show PC health status during POST stage.
945GZ Micro 775 CPU Vcore, NB/SB Voltage, +3.3V, +5.0V, 12.0V, 5V (SB), Voltage Battery Detect the system’s voltage status automatically. Current CPU Temp This field displays the current temperature of CPU. Current CPU FAN Speed This field displays the current speed of CPU fan. Current SYS FAN Speed This field displays the current speed SYSTEM fan.
945GZ Micro 775 9 Frequency/ Voltage Control Figure 9: Frequency/ Voltage Control CPU Clock Ratio This item allows you to select the CPU Ratio. Min= 8 Max= 50 Key in a DEC number. The Choices: 8X (default). CPU CLOCK This item allows you to select CPU Clock, and CPU over clocking. Special Notice: If the system’s frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON” status.
945GZ Micro 775 Method 2: Press the key and Power button simultaneously, after that keep-on pressing the key until the power-on screen showed. This action will boot-up the system according to FSB of the processor It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage. CPU Voltage Regulator This item allows you to select CPU Voltage Regulator The Choices: Default (default), +5%, +15%.