Owner's Manual

Motherboard Manual

JCI1: Chassis O pen Header (Optional)

This connector allows system to monitor PC case open status. If the signal has

been triggered, it will record to the CMOS and show the message on next

boot-up.

Assignment

1 Case open

signal

2 Ground

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4channels SATA interf ace, it

satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.

Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

SATA4 SATA2

SATA3 SATA1

7 Ground

JSPDIF_O UT: Digital Audio out Connector (O ptional)

This connector allows user to connect the PCI bracket SPDIF output header.

Assignment

1 +5V

2 SPDIF_OUT

3 Ground