User`s manual

945GC-M7 SE / 945GC Micro 775
33
PCIE Clock select
The Choices: Fixed 100 (default), Upto CPU, Manual
PCIE Clock
Display the PCIE Clock frequency; Min=100, Max=200, key in a DEC number.
T his option is conf igurable on ly when “P CIE Clock Select” is set to “Manual”.
PCI Clock
The Choices: 33.33 (default) ~ 37.50
Special Notice:
If unfortunately, the system’s frequency that you are selected is not
functionin g, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON”
status. All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.