User`s manual

945GC-M7 SE / 945GC Micro 775
22
Onboa rd Parallel Po rt
This item allows you to determine access onboard parallel port controller with which
I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Para llel Po rt Mo de
The default value is SPP.
The Choices:
SPP (default) Using P aralle l port as Standard P rinter Port.
EPP Using P aralle l P ort as Enhanced Parallel P ort.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
PWRON After PWR-Fail
This settin g specif ies whether your system will reboot after a power
fail or interrupts occurs.
Off Leaves the computer in the power off state.
On Reboots the computer.
Former-Sts Restores the system to the status before power failure or
interrupt occurs.
The Choices: Off (default), On, Former-Sts.