User`s manual

945GC-M7 SE / 945GC Micro 775
19
JKBV1: Power Source Header for PS/2 Keyboard and Mouse
(Only for 945GC Micro 775)
3
1
Pin 1-2 Close
+5V for PS/2 keyboard and
mouse.
13
31
Pin 2-3 close
PS/2 keyboard and mouse are
powered by +5V standby
voltage.
Note:
In order to support this function “Power-on system via keyboard and mouse”, “JKBV1”
jumper cap should be placed on Pin 2-3.
JUSBV1/JUSBV3_1: Power Source Headers for USB Ports
(Only for 945GC Micro 775)
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JRJ45USB1/JUSB2.
JUSBV3_1: +5V for USB ports at front panel (JUSB3/JUSB4).
Pin 2-3 Close:
JUSBV1: USB ports at JRJ45USB1/JUSB2 are powered by +5V standby
voltage.
JUSBV3_1: USB ports at front panel (JUSB3/JUSB4) are powered by +5V
standby voltage.
13
Pin 1-2 close
13
13
JUSBV1
JUSBV3_1
13
Pin 2-3 close
Note:
In order to support this function “Power-On system via USB device,” “JUSBV1/
JUSBV3_1” jumper cap should be placed on Pin 2-3 individually.