Owner's Manual

Motherboard Manual
18
JKBV1: Power Source Header for PS/2 Keyboard and Mouse
(Optional)
31
Pin 1-2 Close
+5V for PS/2 keyboard and
mouse.
13
31
Pin 2-3 close
PS/2 keyboard and mouse are
powered by +5V standby
voltage.
Note:
In or d er to support this f unc tion “ Po wer-on s yste m via ke yboar d a nd mo use”, “ JK BV 1”
jump er cap sh ould be plac ed on Pin 2- 3.
JUSBV1/JUSBV3_1: Powe r Source Heade rs for USB Ports
(Optional)
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JRJ45USB1/JUSB2.
JUSBV3_1: +5V for USB ports at f ront panel (JUSB3/JUSB4).
Pin 2-3 Close:
JUSBV1: USB ports at JRJ45USB1/JUSB2 are powered by +5V standby
v oltage.
JUSBV3_1: USB ports at front panel (JUSB3/JUSB4) are powered by +5V
standby v oltage.
13
Pin 1-2 close
13
13
JUSBV1
JUSBV3_1
13
Pin 2-3 close
Note:
In or d er to support this f unc tion “ Po wer-On s ys te m via U SB de vice,” “JUSB V1/
JUSBV3_1” jumper cap sh ould b e plac ed on Pin 2-3 indi vidu all y.