User`s manual

945GC-M7 TE
9
B. Memory Capacity
DIMM Socket
Location
DDR2 Module Total Memory Size
DDR2_A1 256MB/512MB/1GB *1
DDR2_B1 256MB/512MB/1GB *1
Max memory 2GB.
C. Dual Channel Memory Installation
To trigger the Dual Channel function of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pairs, shown in the following
table.
Dual Channel Status
DDR2_A1
DDR2_B1
Disabled O X
Disabled X O
Enabled O O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
D. FSB Supporting Table
According to the FSB frequency of the installed CPU, the motherboard could
support DDR2 400/533/667 modules. Please refer to the table below to find
out the proper RAM module that fits the FSB of the installed CPU.
FSB of CPU
DDR2 Module
FSB 533 FSB 800 FSB 1066 FSB1333
DDR2 400 O O O X
DDR2 533 O O O O(500)
DDR2 667 O O O O
DDR2 800(compatible) O(667) O(667) O(667) O(667)
(O means supported, X means not supported.)