Owner's Manual

945GC-230/945GC-330

CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

The motherboard includes an embedded Intel Atom N230 / N330

processor, and a heatsink has been installed to provide sufficient cooling.

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JSFAN1/JSFAN2: System Fan Header

Assignment

1 Ground

2 +12V

JSFAN2

JSFAN1

3 FAN RPM rate

sense

Note:

JSFAN1/2 support 3-pin head connector. When connecting with wires onto connectors,

please note that the red wire is the positive and should be connected to pin#2, and the

black wire is Gro und and sho uld be connected to GND.