Owner's Manual

915GV-M7 DDR2
BIOS SETUP
10
TM2 Bus Ratio
Represents the frequency. Bus ratio of the throttled performance state that will
be initiated when the on-die sensor goes from not hot to hot.
The Choices: 0X (default).
TM2 Bus VID
Represents the voltage of the throttled performance state that will be initiated
when the on-die sensor goes from not hot to hot.
The Choices: 0.8375 (default).
Limit CPU ID Max Val
Set limit CPU ID maximum vale to 3, it should be disabled for Win XP.
The Choices: Disabled (default), Enabled.
Execute Disable Bit
The Choices: Enabled (default), Disabled.
HARD DISK BOOT PRIORITY
These BIOS attempt to load the operating system from the device in the sequence
select in these items.
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USBHDD0, BHDD1,
USBHDD2 and Bootable Add-in Cards.