User manual

Inserting the rear rack battery:

Open the lock cylinder: please ensure that the key is removed from the lock cylinder

Place the battery onto the battery docking station

Gently push the battery in a forward direction, towards the battery connector

Make sure the battery is inserted all the way, ﬂush with the docking station cover

Push in the lock cylinder until a ‘click’ is heard

Removing of the rear rack battery:

Turn off the system via the console (no illustration)

Turn the key in the lock cylinder until it pops out

Remove the key from the lock cylinder

Pull the battery backwards, along the battery rail

Handling and Charging the Battery

WARNING

BionX batteries shall only be recharged with BionX chargers or BionX power supplies. The

use of other power supplies/chargers can damage the battery. Never short circuit the bat-

tery by connecting the contacts of the battery. Never open the battery, as this could dam-

age the battery and possibly lead to overheating. The battery cannot be serviced by the

user. Opening the battery case voids all warranty and product liability claims. Never use a

battery which has obvious damage to the case(s) or the battery connector.

001

WARNING

Do not force the battery onto the battery docking station. This can damage the battery

connector, or damage the rear light. Never unplug any connection with the system turned

on - this includes the battery. Pulling a live part can render it inoperable! If a battery is re-

moved while the system is turned on, wait 5 minutes until it turns off before re-installing.

A series of 5 beeps will indicate the battery has shut off and it is safe to install again.

001

1” (25.4mm)

001

CLICK

english