User manual

Inserting or Removing the Battery

Inserting the down tube battery

Place the battery onto the docking station

Slide the battery down the rail gently towards the connector

The release arm will begin to move to the closed position as the battery slides towards the connector

When the release arm is almost closed, hold it in place and simultaneously push in the lock cylinder –

you will hear a “click” when the lock cylinder is properly closed

Removing the down tube battery

Turn off the BionX propulsion system via the console (no illustration)

Lightly press on the battery release arm, insert the key and turn clockwise

The lock cylinder will pop out, freeing the battery release arm

Remove the battery by opening the release arm

Slide the battery upwards on the rail

Lift the battery to remove

25.4mm (1”)

001

25.4mm (1”)

001

1” (25.4mm)

001

WARNING

Do not force the battery release arm closed, or force the battery onto the battery dock.

This can damage the battery connector. Never unplug any connection with the system

turned on - this includes the battery. Pulling a live part can render it inoperable! If a bat-

tery is removed while the system is turned on, wait 5 minutes until it turns off before re-

installing. A series of 5 beeps will indicate the battery has shut off and it is safe to install

again.

25.4mm (1”)

001

25.4mm (1”)

001

25.4mm (1”)

001

1” (25.4mm)

001

“click”

english