Operation Manual

MENU 2001 : kph or mph When you access this menu, press on or to change the unit. Once the right unit is selected, press on to go back to the regular display. MENU 2004 : Time programming Follow steps 2) and 3) to enter the time. MENU 2005 : Wheel size Follow steps 2) and 3) to change the wheel size (in mm) The wheel sizes are pre-programmed as follows:
17
PROGRAMMING MENU
Wheel Diameter Corresponding Circumference (mm)
18 inches 1436 20 inches 1596
24 inches (507 mm) 1915
26 inches 2075 27 inches 2156
700 mm 2199
28 inches 2234
Please follow below procedure to access any programming menu. 1) Hold both and down for a few seconds until
four zeros appear at the bottom left corner of the screen. The first zero is blinking.
2) Press on to go from 1 to 9 and on to go from
9 to 1. When the correct digit is displayed, press on to pass to the next digit.
3) When the fourth digit is chosen, press on to
access the selected programming menu.