Operation Manual

Shortcut to pass directly from one mode to the other
If you already are on assistance mode and wish to pass directly to the generative mode, simply maintain pushed during a few seconds.
Distance, odometer, chronometer, average speed
- Press on to switch displays. - Maintain pushed during 2 seconds to refresh the chrono and distance to
zero.
- Both chrono and distance have to be refreshed individually. - They cumulate when the wheel turns.
Choosing a PIN number - Press on both and simultaneously during 2 seconds. 4 zeros will
appear, the first one is blinking.
- Press on to go from 1 to 9 and on to go from 9 to 1. - When the right digit is displayed, press on to have the next zero blink. - When the fourth digit is chosen, press on to finalize the programming of your
PIN number.
The same way, if you are on generative mode, maintain pushed during a few seconds to come back to the assistance mode.
COMMAND CONSOLE FEATURES
15
AND