Operation Manual

The motor is always on generative mode.

If the ‘’G’’ keeps being displayed on your controller

and you are unable to select any other assistance

level, the magnetic switch underneath the brake

lever is probably too far away from the magnet.

Bring it closer and the ‘’G’’ will disappear.

If you are unable to bring it closer, please unplug

the sensor’s connection and contact your dealer.

If the throttle does not provide power-assist

Press on both ‘’Mode’’ and ‘’G’’ simultaneously.

You will see a countdown on the display.

During this countdown, press on the throttle and

then release.

The charger light keeps flashing and never

switches to solid red.

The inside battery temperature is either too low or

to high.

Let the battery rest and cool down in a cool area

(20C) and replug it later. If the problem persists

after several hours, please contact your dealer.

TROUBLESHOOTING SECTION