Operation Manual

12 13
Inserting or Removing the Console
Inserting the console
• Slide the console into the console mount on the handlebar
• Make sure that the console engages securely. When inserted correctly, you will hear a “click”
Removing the console
• Release the console by pushing the release lever on the console mount
• Slide the console out of the console mount
Center mount
• Available option for all BionX systems
• To be used with regular receptacle, replaces standard mounting
kit (clip & rubber)
“click”
WARNING
Never unplug any connection with the system turned on - this includes the console. Pulling
a live part can render it inoperable!
Inserting or Removing the DS3 Display
Inserting the DS3
• Turn the system off via the RC3 controller (no illustration)
• Place the DS3 on the display dock turned 90° to the left
• Rotate the DS3 90° to the right and the DS3 is locked in place
Removing the DS3
• Turn off the system via the RC3 controller (no illustration)
• Rotate the DS3 90° to the left, it will pop loose
• Lift the DS3 up to remove
WARNING
Never unplug any connection with the system turned on - this includes the DS3 display.
Pulling a live part can render it inoperable!
CLICK
00
ODOMETER
.0
1234.5 km
km/h
00
ODOMETER
.0
1234.5 km
km/h
english
english