User guide

Shortcut to pass directly from
one mode to the other
If you already are on assistance
mode and wish to pass directly
to the generative mode, simply
maintain pushed during a
few seconds.
Distance, odometer,
chronometer, av
- Press to switch displays.
- Maintain pushed during 2 seconds to refresh the chrono and distance to
zero.
- Both chrono and distance have to be refreshed individually.
- They cumulate when the wheel turns.
Choosing a PIN number - Press both and simultaneously during 2 seconds. 4 zeros will appear,
the first one is blinking.
- Press to go from 1 to 9 and on to go from 9 to 1.
- When the right digit is displayed, press on to have the next zero blink.
- When the fourth digit is chosen, press on to finalize the programming of your
PIN number.
The same way, if you are on
generative mode, maintain
pushed during a few seconds to
come back to the assistance mode.
COMMAND CONSOLE FEATURES
8
AND