Product Manual

5
8) Screw the Feeder Assembly onto the
Graduated Feeding Bottle.
9) Begin with the flow adjustment set at “0”
flow, to establish non-nutritive sucking.
Adjust the flow setting (1-5) depending
on the feeding ability of the baby. (Fig. 5)
Do not use powdered formula.
Any unmixed powder may clog the device.
Helpful Hints
1) Begin assembly by building off of the
bottle (i.e. screw the yellow flow restric-
tor to the 60ml graduated feeding bottle).
2) Make sure all 3 tabs of the Green Flow
Adjuster are securely fastened to the
Yellow Flow Restrictor.
3) Screw the nipple assembly (Silicone
Nipple, and Blue Cap Ring) to the Green
Flow Adjuster, with the channel of the
nipple to the side of the post on the
Green Flow Adjuster. When the Nipple
assembly is securely attached, pull up on
the nipple to place the channel inside of
the post on the Green Flow Adjuster.
Push for a tight fit. (Fig. 2)
4) Unscrew bottle from feeder assembly
to fill.
Fig.5