User Manual

28
NESS L300 Plus
User’s Guide
Figure 6: Gait Sensor placed in a left shoe.
The pressure sensor fits under the insole of the shoe of the affected leg,
attached to a Gait Sensor pad. See Figure 6. The transmitter is worn clamped
to the inner rim of the shoe. Shoe spacers are provided to protect the shoe
from damage from the clamp.
The Gait Sensor can be transferred to a different shoe, or additional sensors
can be purchased for different shoes. You do not need to detach the Gait
Sensor between uses.
The Gait Sensor is powered by a small non-rechargeable battery. The battery
will need to be replaced after approximately six months of use. The L300
Plus System Kit includes a replacement battery and a Phillips screwdriver
for changing the battery.
Caution: The Gait Sensor has not been validated for use by
individuals weighing more than 300 pounds (136 kilograms).