User Manual

89
Chapter 8 - Operating the L300 Plus Control Unit
Replacing the L300 Hydrogel Electrodes
You will need to replace the hydrogel electrodes at least every two weeks.
Caution: Use only NESS L300 electrodes supplied by Bioness.
Caution: Do not use your NESS L300 without electrodes.
To replace the hydrogel electrodes:
1. Turn off the L300 Plus Control Unit.
2. Gently pull the used L300 hydrogel electrodes from the hydrogel electrode
bases. Be careful not to detach the electrode bases from the L300 FS
Cuff. See Figure 50.
3. If necessary, clean the electrode bases with a damp cloth. Do not use a
chemical-based cleaning substance.
Figure 50: Removing the used L300 hydrogel electrodes.
Electrode Base