User Manual

95
Chapter 9 - Component Maintenance and Cleaning
Replacing the L300 Electrode Bases
If you are switching from L300 hydrogel electrodes to L300 cloth electrodes,
or from L300 cloth electrodes to L300 hydrogel electrodes, you will need to
be seen by a qualified clinician for a first fitting. Your clinician will need to fit
the L300 electrode bases and adjust your stimulation settings. Afterward you
will need to replace the L300 electrode bases after one to two years of use.
Contact Bioness to purchase replacement electrode bases.
To replace the L300 electrode bases:
1. If your clinician installed wire concealers over the electrode base wires,
remove the wire concealers.
2. Mark the position of the used electrode bases on the FS Cuff liner with a
permanent marker. See Figure 59.
Caution: When replacing the L300 FS Cuff, have your clinician
re-fit the electrodes and electrode bases.
Figure 59: Marking the position of the used L300 electrode bases.