User Manual

91
Chapter 8 - Operating the L300 Plus Control Unit
Figure 53: Attaching the hydrogel electrodes to the hydrogel electrode bases.
Figure 54: Removing the covers from the hydrogel electrodes.
Note: Save the covers. Always reapply the covers between uses. When
reapplying the covers, make sure the Bioness logo faces up.
Note: If the electrode gel dries, rehydrate it with one to two drops of water.
6. Attach the grid side of the hydrogel electrodes to the hydrogel electrode
bases, and then press firmly. See Figure 53.
7. Remove the covers from the hydrogel electrodes. See Figure 54.