User Manual

78
NESS L300 Plus
User’s Guide
Testing Stimulation
The stimulation test button is used to manually check the position of the FS
Cuff on the leg. Each FS Cuff can be tested individually.
Testing the L300 FS Cuff
To test the position of the L300 FS Cuff:
1. Place the Control Unit in standby mode.
2. Press the "down" button to select the L300 RF Stim Unit. The L300 RF
Stim Unit indicator and the arrow next to the L300 RF Stim Unit indicator
will light GREEN to confirm the selection.
3. Press and hold the stimulation test button. The L300 RF Stim Unit
will stimulate until the stimulation test button is released.
Testing the Thigh FS Cuff
To test the position of the Thigh FS Cuff:
1. Press the "up" button to select the Thigh RF Stim Unit. The Thigh RF
Stim Unit indicator and the arrow next to the Thigh RF Stim Unit indicator
will light GREEN to confirm the selection.
2. Press and hold the stimulation test button. The Thigh RF Stim Unit
will stimulate until the stimulation test button is released.