User Manual

75
Chapter 8 - Operating the L300 Plus Control Unit
2. Press the plus or minus intensity adjustment button on the
Control Unit to change the intensity level. The Control Unit will beep with
each change in level. The new level will show in the digital display.
Note: An intensity level of “0” equals no stimulation.
Adjustment Guidelines
If your foot slightly drags or catches on the floor while walking, increase
stimulation intensity in the L300 RF Stim Unit to lift the foot higher.
If your foot rises too high while walking or if stimulation is unpleasant, decrease
stimulation intensity in the L300 RF Stim Unit. Be sure your foot does not
drag or catch on the floor after decreasing the intensity level.