User Manual

74
NESS L300 Plus
User’s Guide
Adjusting Stimulation Intensity
When the Control Unit is first turned on, the stimulation intensity level will
be “5”. This level is set by your clinician. Normally, you will not need to
adjust stimulation intensity other than when walking on different surfaces or
in different shoes.
The L300 Plus Control Unit allows you to adjust stimulation intensity individually
for each RF Stim Unit using the RF Stim Unit selection buttons and the plus
and minus buttons.
Adjusting the L300 RF Stim Unit
To adjust stimulation intensity for the L300 RF Stim Unit:
1. Press the "down" button to select the L300 RF Stim Unit. The L300 RF
Stim Unit indicator and the arrow next to the L300 RF Stim Unit indicator
will light GREEN to confirm the selection. See Figure 41.
Figure 41: L300 RF Stim Unit selected.