User Manual

73
Chapter 8 - Operating the L300 Plus Control Unit
Turning On/Off the Control Unit
To turn on the L300 Plus Control Unit, press the on/off button once. The
system will start in standby mode. All display indicators will light up for a few
seconds while the system performs a self-test. The on/off button will
flash GREEN to indicate the system is on. To turn off the Control Unit, press
the on/off button once.
Selecting an Operating Mode
Selecting Gait Mode
To select gait mode, turn on the Control Unit, and press the mode button
briefly. The Control Unit will beep and the mode button will start flashing
YELLOW SLOWLY (indicating that stimulation is off). When stimulation is
on, the mode button will flash YELLOW RAPIDLY.
Selecting Training Mode
To select training mode, turn on the Control Unit. Press and hold the mode
button until the Control Unit beeps, the mode button starts flashing
YELLOW SLOWLY (indicating that stimulation is off), and (“t” for training)
alternates with the intensity level in the digital display. When stimulation is
on, the mode button will flash YELLOW RAPIDLY.
Returning to Standby Mode
To return to standby mode from gait or training mode, press the
flashing mode button briefly. The Control Unit will beep, and the mode
button will stop flashing.