User Manual

70
NESS L300 Plus
User’s Guide
6. Cover the pressure sensor with the insole. Tuck any excess wire under
the insole. See Figure 40.
Left Shoe
Figure 40: Insole covering the pressure sensor and wire.
Switching Shoes/Gait Sensors
When switching the Gait Sensor to a different shoe, make sure to place a
Gait Sensor pad in the other shoe first.
If multiple Gait Sensors are placed in multiple shoes and you want to
switch shoes:
1. Turn off the system.
2. Switch shoes.
3. Turn the system back on.