User's Manual

87
Chapter 11 - Maintenance and Cleaning
Disinfecting
Electronic Components
The Control Unit may be cleaned and low-level disinfected using CaviWipes™
(Metrex, Orange, CA), or wipes or cloths saturated (but not dripping) with
70% isopropyl alcohol (IPA) per the instructions below:
1.
Use one saturated disinfectant wipe or cloth to thoroughly wet the component
surface.
2. Use a second saturated disinfectant wipe or cloth to remove any surface
contaminants. Soil, etc., will impede the disinfectant's effectiveness, if
not removed.
3. As needed, use additional saturated disinfectant wipes or cloths to keep
the components surface wet for 3 minutes.
Note: Be sure to follow the Bioness instructions for the specified contact time
to ensure an effective bacteria kill.