Manualshelf

User's Manual

ManualsBrandsBioness Neuromodulation ltd. A Bioness ManualsElectronicsRF wireless orthosis
919293949596979899100
84
User's Guide
H200
Wireless
Control Unit
Battery
Battery Cover
Screw
Battery Replacement: H200 Wireless Control Unit
The battery in the H200 Wireless Control Unit is a rechargeable AAA NiMH
battery. It should be replaced approximately every two years.
To replace the Control Unit battery (AAA NiMH 1.2 V):
1. Using a Phillips screwdriver,
remove the screw from the battery cover on
the back of the H200 Wireless Control Unit. See Figure 11-1.
Note: The screw is under a small label. Gently peel off the end of the label.
Reapply the label after the battery is replaced.
Figure 11-1: Replacing the H200 Wireless Control Unit battery.