User's Manual

76
User's Guide
Key Grip
To use Key Grip:
1. Press the Control Unit
trigger button or Orthosis trigger button to
start stimulation. Your fingers will close and your thumb will open. There
should be a gap between your thumb and the side of your index finger.
2. While your fingers and thumb are in this position, place the object you
want to grip into the gap.
3.
After several seconds, your fingers and thumb will close around the object.
4. When you are ready to release the object, press the Control Unit trigger
button or the Orthosis trigger button a second time. Your hand will open,
allowing you to release the object.
5. Stimulation will then stop. Your hand will relax.
Stopping Stimulation
Press the trigger button on the Control Unit or the trigger button on the
Orthosis. Stimulation will turn off.
Note: In a Neuroprosthesis program press the
on/off button to stop
stimulation immediately.