User's Manual

75
Chapter 9 - Operating the H200 Wireless System
Grasp and Release
To use Grasp and Release:
1. Press the Control Unit
trigger button or Orthosis trigger button to
start stimulation. Your hand will open.
2. While your hand is open, place it next to the object you want to grasp.
3. After several seconds, your hand will close, allowing you to grasp the
object.
4. When you are ready to release the object, press the Control Unit trigger
button or the Orthosis trigger button a second time. Your hand will open,
allowing you to release the object.
5. Stimulation will then stop. Your hand will relax.
Note: If stimulation turns off abruptly, the object will release from your grasp.